Gas Pressure Measurement Device and Medical Vacuum Design
Abstract
Two methods are used in a digital pressure meter available in the market, namely positive pressure, and negative pressure. The positive one is used to measure the air pressure on a sphygmomanometer and medical gas pressure at an outlet in the treatment room so that operators can easily check medical gas pressure for the safety of the patient, or they can routinely check to find out how much pressure of the medical gas. Based on the background, the research aimed to design a digital pressure meter equipped with a medical gas measurement mode so that the device can be used to calibrate the sphygmomanometer, suction pump, and measure the medical gas pressure available at the medical gas outlet in each treatment room.
Full Text:
PDFReferences
A. Miyazaki, M. Yagi, S. Kobayashi, H. Nishima, Y. Nakura, and H. Higashi, “Gas pressure monitoring system for GIL using fiber-optic gas density sensors,” IEEJ Trans. Power Energy, vol. 119, no. 4, pp. 451–457, 1999.
L. Graber and M. K. Pradhan, “Monitoring the SF6 pressure level in metal-enclosed switchgear to detect gas leakages,” in 2008 International Conference on Condition Monitoring and Diagnosis, 2008, pp. 357–362.
Lung-Jieh Yang and A-Fu Kao, “Gas permeation in PDMS monitored by on-site pressure sensors,” in 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems, 2010, pp. 352–355.
X. C. Hao, Y. G. Jiang, H. Takao, K. Maenaka, T. Fujita, and K. Higuchi, “Zero temperature coefficient gas-sealed pressure sensor using mechanical temperature compensation,” in 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference, 2011, pp. 116–119.
H. Mishra, P. Karkulali, A. Ukil, and J. Dauwels, “Testbed for real-time monitoring of leak in low pressure gas pipeline,” in IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, 2016, pp. 459–462.
S. R. Ravula, S. C. Narasimman, L. Wang, and A. Ukil, “Experimental Validation of Leak and Water-Ingression Detection in Low-Pressure Gas Pipeline Using Pressure and Flow Measurements,” IEEE Sens. J., vol. 17, no. 20, pp. 6734–6742, Oct. 2017.
A. Kumar and N. P. Pathak, “Wireless Monitoring of Volatile Organic Compounds/Water Vapor/Gas Pressure/Temperature Using RF Transceiver,” IEEE Trans. Instrum. Meas., vol. 67, no. 9, pp. 2223–2234, Sep. 2018.
L. Chao, C. Lisheng, L. Jinfeng, P. Guangjuan, and Z. Ruizhi, “Intelligent gas pressure regulator control system,” in 2017 29th Chinese Control And Decision Conference (CCDC), 2017, pp. 2723–2728.
K. Liu, S. Ji, L. Zhong, X. Xue, L. Zhu, and Y. Wang, “The mechanism of SF6 decomposition characteristics under partial discharge at different gas pressures and voltage,” in 2016 IEEE International Power Modulator and High Voltage Conference (IPMHVC), 2016, pp. 141–146.
S. Unnikrishnan, M. Razil, J. Benny, S. Varghese, and C. V. Hari, “LPG monitoring and leakage detection system,” in 2017 International Conference on Wireless Communications, Signal Processing and Networking (WiSPNET), 2017, vol. 2018-Janua, pp. 1990–1993.
Q. Luo, X. Guo, Y. Wang, and X. Wei, “Design of wireless monitoring system for gas emergency repairing,” in 2016 Chinese Control and Decision Conference (CCDC), 2016, pp. 3624–3629.
M. M. Ahmed, S. Banu, and B. Paul, “Real-time air quality monitoring system for Bangladesh’s perspective based on Internet of Things,” in 2017 3rd International Conference on Electrical Information and Communication Technology (EICT), 2017, vol. 2018-Janua, no. December, pp. 1–5.
G. Parmar, S. Lakhani, and M. K. Chattopadhyay, “An IoT based low cost air pollution monitoring system,” in 2017 International Conference on Recent Innovations in Signal processing and Embedded Systems (RISE), 2017, vol. 2018-Janua, pp. 524–528.
A. M. C. Ilie and C. Vaccaro, “Design of a smart gas detection system in areas of natural gas storage,” in 2017 IEEE International Geoscience and Remote Sensing Symposium (IGARSS), 2017, pp. 5954–5957.
K. Keshamoni and S. Hemanth, “Smart Gas Level Monitoring, Booking & Gas Leakage Detector over IoT,” in 2017 IEEE 7th International Advance Computing Conference (IACC), 2017, pp. 330–332.
M. Pavani and P. T. Rao, “Real time pollution monitoring using Wireless Sensor Networks,” in 2016 IEEE 7th Annual Information Technology, Electronics and Mobile Communication Conference (IEMCON), 2016, pp. 1–6.
V. Di Lecce, D. Petruzzelli, D. Soldo, and A. Quarto, “Online wastewater monitoring system using solid state sensor,” in 2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016, pp. 1–5.
D. Spirjakin, A. M. Baranov, and S. Akbari, “Energy harvesting algorithms for wireless multi-sensor gas platform,” in 2016 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016, pp. 1–6.
Z. Marinkovic, A. Atanaskovic, M. G. Xibilia, C. Pace, M. Latino, and N. Donato, “A neural network approach for safety monitoring applications,” in 2016 IEEE Sensors Applications Symposium (SAS), 2016, pp. 1–5.
M. Rossi and D. Brunelli, “Gas Sensing on Unmanned Vehicles: Challenges and Opportunities,” in 2017 New Generation of CAS (NGCAS), 2017, no. Dii, pp. 117–120.
R. Kurzekar, H. Arora, and R. Shrestha, “Embedded Hardware Prototype for Gas Detection and Monitoring System in Android Mobile Platform,” in 2017 IEEE International Symposium on Nanoelectronic and Information Systems (iNIS), 2017, vol. 2018-Febru, pp. 6–10.
R. Kumar and A. N. Khalkho, “Design and implementation of metal detector using DTMF technology,” in 2016 International Conference on Signal Processing, Communication, Power and Embedded System (SCOPES), 2016, vol. VI, no. July, pp. 368–371.
B. K. Mansingh, S. Karthik, and D. Chandrakumar, “C.A.D.F.I.R.E control and automation of domestic fuel by incorporating relay and emergency alarms,” in 2013 International Conference on Green Computing, Communication and Conservation of Energy (ICGCE), 2013, pp. 485–487.
A. Mandal, S. Panda, and A. Goswami, “Driving a Charged Coupled Device (CCD) by microcontroller for LIBS based application,” in 2018 International Symposium on Devices, Circuits and Systems (ISDCS), 2018, no. Ccd, pp. 1–5.
Z. Raza, S. Ashraf, K. Liaquat, and H. Kashif, “Monitoring of soldier’s health and transmission of secret codes,” in 2016 Sixth International Conference on Innovative Computing Technology (INTECH), 2016, pp. 349–354.
E. Ebert, H. Kruger, H. Ewald, M. Rabe, and N. A. Damaschke, “Comparison of two variants of a novel setup for real time high resolution UV-LED absorption spectroscopy,” in 2015 9th International Conference on Sensing Technology (ICST), 2015, vol. 2016-March, pp. 430–433.
L. C. L. Landicho, I. R. Magbalon, and C. P. S. Reyes, “A wireless electrocardiogragphy in superintending cardiac rate extremes with global positioning capability to remotely localize specimen,” in 2015 IEEE International Conference on Control System, Computing and Engineering (ICCSCE), 2015, no. November, pp. 141–145.
W. Reshmi, R. K. Sundaram, and M. R. Kumar, “Sensor unit for waste management: A better method for frequent data updating system,” in 2014 International Conference on Science Engineering and Management Research (ICSEMR), 2014, pp. 1–5.
C. V. A. Satwik, L. P. Kumar, K. Vineeth, and K. N. Pillai, “Intelligent Road Management System for Daily Transit,” in 2018 International Conference on Communication and Signal Processing (ICCSP), 2018, pp. 0523–0526.
Z. Bai, X. Chen, and J. Li, “A miniaturized single-chip oximetry module utilizing reflectance photoplethysmography,” in 2017 10th International Congress on Image and Signal Processing, BioMedical Engineering and Informatics (CISP-BMEI), 2017, pp. 1–5.
S. Kokare, R. Shastri, and S. Kolhar, “Line Follower with Obstacle Information System Using ZigBee,” in 2018 Fourth International Conference on Computing Communication Control and Automation (ICCUBEA), 2018, pp. 1–5.
M. S. Bin Mostafa, A. K. M. Masum, M. S. Uddin, M. K. A. Chy, and S. M. T. Reza, “Amphibious Line following Robot for Product Delivery in Context of Bangladesh,” in 2019 International Conference on Electrical, Computer and Communication Engineering (ECCE), 2019, pp. 1–6.
DOI: https://doi.org/10.18196/jrc.1208
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Journal of Robotics and Control
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com