Monitoring the Environmental Temperature of the Arduino Assistance Engineering Faculty Using Telegram
Abstract
The temperature of the air is the state of hot air caused by the heat of the sun. Factors that affect the amount of solar heat received by the earth are cloud, the surface plane, the angle of the sun, and the length of the sun's exposure. The heat of the earth's surface by solar radiation affects the heat of the air. Earth's surface air temperature varies because sunlight spreads unevenly on the earth's surface. The research aimed to design and implement a series of tools that can measure the ambient temperature and provide information about the environmental temperature via telegram. The methods used in this research were analyses consisting of needs analysis, and analysis of how it worked. Hardware and software implementations were also applied. The research carried out several tests, including tests on the DHT11 sensor, LED light, LCD i2c, Ethernet Shield, and Telegram test. The integration test on the LCD showed that when the temperature was below or the same as 25˚C, the green LED would be ON and the red LED OFF, which indicated that it was cold temperature. Conversely, when the temperature was the same or above 30˚C, the red LED would be ON, and the green LED OFF, indicating that the temperature was hot. The second test was to compare digital and analog sensors. The comparison values of the digital and analog temperatures were 1.1˚C, and the humidity was 23.1% RH. The highest temperature obtained from the system per day was 34˚C, and the lowest temperature was 23˚C.
Keywords
Full Text:
PDFReferences
A. Rerkratn and A. Kaewpoonsuk, “ZigBee based wireless temperature monitoring system for shrimp farm,” in 2015 15th International Conference on Control, Automation and Systems (ICCAS), 2015, no. lCCAS, pp. 428–431.
A. N. Yumang, C. C. Paglinawan, M. M. Sejera, A. S. Lazam, J. C. Pagtakhan, and J. S. B. Santos, “ZigBee Based Monitoring of Temperature and Humidity of Server Rooms using Thermal Imaging,” in 2016 6th IEEE International Conference on Control System, Computing and Engineering (ICCSCE), 4992, no. November, pp. 452–454.
D. Punetha and V. Mehta, “A Wireless Approach to Real Time Remote Monitoring System examining Environmental Parameters Using Feasibility of a GSM Module,” in 2014 International Conference on Advances in Engineering & Technology Research (ICAETR - 2014), 2014, pp. 1–6.
D. Erdenechimeg, D. Enkhzul, O. Munkhtamir, and B. Enkhbat, “Wireless monitoring method for diabetic foot temperature,” in 2017 19th International Conference on Advanced Communication Technology (ICACT), 2017, pp. 39–43.
N. A. A. Latiff, H. A. Illias, and A. H. A. Bakar, “Condition monitoring of discharged ZnO surge arrester on temperature distribution under various design conditions,” in 2016 International Conference on Condition Monitoring and Diagnosis (CMD), 2016, pp. 562–565.
Tao Wu, Man-Kay Law, Pui-In Mak, and R. P. Martins, “An ultra-low power CMOS smart temperature sensor for clinical temperature monitoring,” in 2013 IEEE International Conference of Electron Devices and Solid-state Circuits, 2013, no. 3, pp. 1–2.
M. Cozzini, S. Dalpez, A. Bozzoli, and D. Macii, “A fine-grained temperature monitoring system for sustainable geothermal boreholes,” in 2013 IEEE Workshop on Environmental Energy and Structural Monitoring Systems, 2013, no. Cmm, pp. 1–6.
D. Yan, S. M. Lee, L. Ye, L. Wang, J. Liu, and Y. Sun, “In-Situ Temperature Monitoring and Deposition Induced Errors Calibration in Metal-Organic Chemical Vapor Deposition,” in 2013 Third International Conference on Instrumentation, Measurement, Computer, Communication and Control, 2013, pp. 897–900.
G. Ali, A. Badawy, and H. G. Kerkhoff, “Accessing on-chip temperature health monitors using the IEEE 1687 standard,” in 2016 IEEE International Conference on Electronics, Circuits and Systems (ICECS), 2016, pp. 776–779.
S. Wen, H. Heidari, A. Vilouras, and R. Dahiya, “A wearable fabric-based RFID skin temperature monitoring patch,” in 2016 IEEE SENSORS, 2016, pp. 1–3.
W. Wang and L. Wang, “A temperature remote monitoring system of cable joint,” in 2010 2nd International Conference on Signal Processing Systems, 2010, vol. 1, pp. V1-690-V1-694.
A. Jenkins, B. Mekhanoshin, and V. Shkaptsov, “Conductor temperature monitoring as a tool to increase capacity of transmission network infrastructure elements,” in IEEE PES T&D 2010, 2010, pp. 1–6.
S. Vlase, M. Duta, S. Popescu, C. Salceanu, C. Dobrea, and L. Stefan, “Local monitoring system of the permissible temperature for the medium voltage metal-enclosed switchgear and control gear,” in 2010 3rd International Symposium on Electrical and Electronics Engineering (ISEEE), 2010, pp. 311–313.
X. Wu, J. L. Sanders, D. N. Stephens, and O. Oralkan, “Photoacoustic-imaging-based temperature monitoring for high-intensity focused ultrasound therapy,” in 2016 38th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2016, vol. 2016-Octob, pp. 3235–3238.
M. W. A. Khan, M. Rizwan, L. Sydanheimo, Y. Rahmat-Samii, L. Ukkonen, and T. Bjorninen, “Effect of temperature variation on remote pressure readout in wirelessly powered intracranial pressure monitoring system,” in 2017 39th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2017, pp. 1728–1731.
A. Zacepins and J. Meitalovs, “Implementation of multi-node temperature measurement system for bee colonies online monitoring,” in Proceedings of the 2014 15th International Carpathian Control Conference (ICCC), 2014, pp. 695–698.
W. Honda, S. Harada, T. Arie, S. Akita, and K. Takei, “Printed wearable temperature sensor for health monitoring,” in IEEE SENSORS 2014 Proceedings, 2014, pp. 2227–2229.
R. Yang, Z. Wang, J. Lee, K. Ladhane, D. J. Young, and P. X. L. Feng, “Temperature dependence of torsional and flexural modes in 6H-SiC microdisk resonators,” in 2014 IEEE International Frequency Control Symposium (FCS), 2014, no. c, pp. 1–3.
S. Y. Sim, W. K. Lee, H. J. Baek, and K. S. Park, “A nonintrusive temperature measuring system for estimating deep body temperature in bed,” in 2012 Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2012, pp. 3460–3463.
Yaguang Guo, B. X. Du, Y. Gao, Xiaolong Li, and H. B. Li, “On-line monitoring system based on MODBUS for temperature measurement in smart grid,” in IEEE PES Innovative Smart Grid Technologies, 2012, pp. 1–5.
T. Pawlenka and J. Skuta, “Security system based on microcontrollers,” in 2018 19th International Carpathian Control Conference (ICCC), 2018, pp. 344–347.
H. Anwar, H. Santoso, T. D. Khameswara, and A. U. Priantoro, “Monitor-PoP — ISP’s PoP room temperature and humidity web based monitoring using microcontroller,” in 2017 IEEE 8th Control and System Graduate Research Colloquium (ICSGRC), 2017, no. August, pp. 212–216.
R. F. Gusa, W. Sunanda, I. Dinata, and T. P. Handayani, “Monitoring System for Solar Panel Using Smartphone Based on Microcontroller,” in 2018 2nd International Conference on Green Energy and Applications (ICGEA), 2018, pp. 79–82.
P. Visconti, A. Lay-Ekuakille, P. Primiceri, G. Ciccarese, and R. de Fazio, “Hardware Design and Software Development for a White LED-Based Experimental Spectrophotometer Managed by a PIC-Based Control System,” IEEE Sens. J., vol. 17, no. 8, pp. 2507–2515, Apr. 2017.
A. A. Aldair, A. T. Rashid, and M. Mokayef, “Design and Implementation of Intelligent Control System for Egg Incubator Based on IoT Technology,” in 2018 4th International Conference on Electrical, Electronics and System Engineering (ICEESE), 2018, pp. 49–54.
H. Li, M. K. Ochani, H. Zhang, and L. Zhang, “Design of micro-automatic weather station for modern power grid based on STM32,” J. Eng., vol. 2017, no. 13, pp. 1629–1634, Jan. 2017.
S. Bipasha Biswas and M. Tariq Iqbal, “Solar Water Pumping System Control Using a Low Cost ESP32 Microcontroller,” in 2018 IEEE Canadian Conference on Electrical & Computer Engineering (CCECE), 2018, vol. 2018-May, pp. 1–5.
V. A. Wardhany, H. Yuliandoko, Subono, M. U. Harun AR, and I. G. Puja Astawa, “Fuzzy Logic Based Control System Temperature, pH and Water Salinity on Vanammei Shrimp Ponds,” in 2018 International Electronics Symposium on Engineering Technology and Applications (IES-ETA), 2018, pp. 145–149.
B. S. Mandala, S. Sumaryo, and Estananto, “Smart Gold Fish Eggs Nursery with Microcontroller,” in 2018 International Symposium on Electronics and Smart Devices (ISESD), 2018, pp. 1–6.
P. Roy, J. Saha, N. Dutta, and S. Chandra, “Microcontroller based automated room light and fan controller,” in 2018 Emerging Trends in Electronic Devices and Computational Techniques (EDCT), 2018, pp. 1–4.
Ritzkal, "Manajemen Jaringan untuk Pemula," UIKA Press, 2018.
S. Syaiful, D. Hariyadi, "Case Study on Sustainable T-Junction Cibinong City Mall (CCM) in Bogor Indonesia, Asian Research Publishing Network (ARPN) Journal of Engineering and Applied Science, vol. 14, no. 17, 2019.
DOI: https://doi.org/10.18196/jrc.1321
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 Journal of Robotics and Control (JRC)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com