Control System for Adjusting the Brightness Level with PWM Technique Using Visual Net Microcontroller-Based

Dedi Setiawan, Ishak Ishak, Muhammad Ardiansyah Sembiring

Abstract


The lamp is an artificial source of light that is produced by channelling electric current through the filament which then heats up and produces light. Eye health experts believe that the ideal brightness of a lamp depends on ambient light or ambient light. The rule must ensure that the brightness of the lights must be equivalent to the light around. That way the light from the lights and surroundings will blend and not make the eyes have to work harder. To overcome this problem a control system can be created by implementing the pulse width modulation (PWM) technique that can control the brightness of the lights manually using a visual net application. Utilization of a microcontroller as a control center in controlling the brightness level of the lamp using the type of microcontroller avr16 by displaying the PWM value on the form design on the visual net. Thus setting the level of light brightness to be ideal in the conditions we want.

Keywords


Microcntroller, Visual Net, PWM

Full Text:

PDF

References


G. Zigirkas and J. Kalomiros, “Voltage control of single-phase induction motors using asymmetrical PWM and fuzzy logic,” in 2016 5th International Conference on Modern Circuits and Systems Technologies (MOCAST), 2016, pp. 1–4.

S. A. Zulkifli, F. N. F. Ramli, and S. Razali, “Undergraduate student experience in development of ZVS power converter for voltage control with low cost microcontroller,” in 2016 IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 2016, no. October, pp. 55–60.

R. R. Shaikh and J. R. Rana, “Single phase seven level inverter,” in 2016 International Conference on Energy Efficient Technologies for Sustainability (ICEETS), 2016, no. Mli, pp. 306–310.

V. Ravindran and J. Sutaria, “Implementation in arm microcontroller to maximize the power output of solar panel using Hill Climbing Algorithm,” in 2016 International Conference on Electrical, Electronics, and Optimization Techniques (ICEEOT), 2016, pp. 1234–1240.

Z. Xu and Y. Kang, “PWM speed DC motor drive power design,” in 2016 31st Youth Academic Annual Conference of Chinese Association of Automation (YAC), 2016, pp. 419–423.

L. P. D. Silva et al., “Low-cost didactic module for single-phase inverter teaching,” in 2017 Brazilian Power Electronics Conference (COBEP), 2017, vol. 12, no. 2, pp. 1–6.

R. Guedouani, B. Fiala, and M. S. Boucherit, “Implementation of multi-carrier PWM using a DSP TMS320F28335. Application to series multicellular single-phase inverter,” in 2017 10th International Conference on Electrical and Electronics Engineering (ELECO), 2017, pp. 1424–1429.

D. Savkin, A. Anuchin, V. Kulmanov, Y. Vagapov, and I. Gulyaev, “Real-time model of switched reluctance drive based on a LUT magnetization curve for educational purposes,” in 2017 15th International Conference on Electrical Machines, Drives and Power Systems (ELMA), 2017, pp. 480–483.

Shivesh, R. Mishra, and E. A. Elisabeth, “Speed control of ceiling fan using PWM technique,” in 2017 International Conference on Computation of Power, Energy Information and Commuincation (ICCPEIC), 2017, vol. 2018-Janua, pp. 686–690.

H. Bolanos-Cerrud, A. Martinez-Sibaja, J. P. Rodriguez-Jarquin, K. Romero-Guizasola, I. Herrera-Aguilar, and R. Posada-Gomez, “Optimization algorithm for accurate frequency sine wave PWM generation with microcontrollers,” in 2017 14th International Conference on Electrical Engineering, Computing Science and Automatic Control (CCE), 2017, pp. 1–6.

M. Aref, I. Ahmed, V. Oboskalov, A. Mahnitko, and A. Gavrilovs, “Microcontroller Look-up Table of Digital Control MPPT of PV System,” in 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON), 2018, pp. 1–5.

M. Pimentel, Y. Alejaldre, A. Avalos, and J. Cerda, “A HIL-based DC Motor Speed Control,” in 2018 IEEE International Autumn Meeting on Power, Electronics and Computing (ROPEC), 2018, no. Ropec, pp. 1–5.

S. C. Yener and R. Mutlu, “A microcontroller-based ECG signal generator design utilizing microcontroller PWM output and experimental ECG data,” in 2018 Electric Electronics, Computer Science, Biomedical Engineerings’ Meeting (EBBT), 2018, pp. 1–4.

A. T. Mohsin and I. M. Abdulbaqi, “Analysis of an Irrigation Pump Driver Fed by Solar PV Panels (Part II),” in 2018 International Conference on Engineering Technology and their Applications (IICETA), 2018, no. Part II, pp. 1–6.

A. El Kebir, H. Belhadj, K. Negadi, and A. B. Bey, “Design and Construction of an Inverter for a Photovoltaic System,” in 2018 IEEE XXVII International Scientific Conference Electronics - ET, 2018, pp. 1–4.

I. A. Khan, Y. Xu, and B. Tahir, “Design and manufacturing of digital MOSFET based-AVR for synchronous generator,” in 2015 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER), 2015, pp. 217–222.

J. Jasielski, S. Kuta, W. Kolodziejski, and W. Machowski, “Hybrid LBDD PWM modulator for digital class-BD audio amplifier based on STM32F407VGT6 microcontroller and analog DLL,” in 2015 22nd International Conference Mixed Design of Integrated Circuits & Systems (MIXDES), 2015, pp. 556–561.

K. . Ravi Kumar, Jaideep, Rohit, and Vikas, “Microprocessor based closed loop speed control of DC motor using PWM,” in 2015 International Conference on Control, Instrumentation, Communication and Computational Technologies (ICCICCT), 2015, vol. 2, pp. 255–257.

A. A. A. Ahmed, E. E. E. Omer, A. M. E. Ahmed, and A. A. H. Elnazir, “Microcontroller based design of rectifier for chemical surface treatment,” in 2015 International Conference on Computing, Control, Networking, Electronics and Embedded Systems Engineering (ICCNEEE), 2015, pp. 162–167.

J. Liu and Z. Dong, “A design for high voltage DC power supply,” in 2015 5th International Conference on Electric Utility Deregulation and Restructuring and Power Technologies (DRPT), 2015, pp. 2227–2231.

A. Hodzic and E. Mujcic, “Teleoperation system control based on the method for supervisory control with variable time delay,” in 2015 23rd Telecommunications Forum Telfor (TELFOR), 2015, pp. 345–348.

S. P. Preejith, A. Alex, J. Joseph, and M. Sivaprakasam, “Design, development and clinical validation of a wrist-based optical heart rate monitor,” in 2016 IEEE International Symposium on Medical Measurements and Applications (MeMeA), 2016, pp. 1–6.

Y. S. Yang and H. C. Kim, “Development of a miniaturized IV drip rate meter using optical sensors and fuzzy rule based detection algorithm,” in Proceedings of the 20th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. Vol.20 Biomedical Engineering Towards the Year 2000 and Beyond (Cat. No.98CH36286), 1998, vol. 4, no. 4, pp. 1795–1798.

S. A. Daud, S. S. Mohd Sobani, M. H. Ramiee, N. H. Mahmood, P. L. Leow, and F. K. Che Harun, “Application of Infrared sensor for shape detection,” in 2013 IEEE 4th International Conference on Photonics (ICP), 2013, pp. 145–147.

Molla Shahadat Hossain Lipu, Tahia Fahrin Karim, Md. Lushanur Rahman, and F. Sultana, “Wireless security control system & sensor network for smoke & fire detection,” in 2010 IEEE International Conference on Advanced Management Science(ICAMS 2010), 2010, vol. 3, pp. 153–157.

T. Ruytenberg, A. G. Webb, and J. W. M. Beenakker, “A multi-purpose open-source triggering platform for magnetic resonance,” J. Magn. Reson., vol. 247, pp. 15–21, Oct. 2014.

A. Bhaskar, “EyeAwake: A cost effective drowsy driver alert and vehicle correction system,” in 2017 International Conference on Innovations in Information, Embedded and Communication Systems (ICIIECS), 2017, pp. 1–6.

T. Adiono, M. Y. Fathany, S. Feranti Anindya, S. Fuada, and I. G. Purwanda, “Wirelessly Control for RGB Lamp End-device: Design and Implementation,” in TENCON 2018 - 2018 IEEE Region 10 Conference, 2018, no. October, pp. 2066–2070.

M. A. Yusof and Y. Wen Hau, “Mini Home-Based Vital Sign Monitor with Android Mobile Application (myVitalGear),” in 2018 IEEE-EMBS Conference on Biomedical Engineering and Sciences (IECBES), 2018, pp. 150–155.

N. Prabhu, D. Naik, G. Prashanth, and S. Mikkili, “Smart Energy Auditing using GSM and Fuzzy Logic Controller based Power Quality Management,” in 2018 International Conference on Smart City and Emerging Technology (ICSCET), 2018, pp. 1–6.




DOI: https://doi.org/10.18196/jrc.1422

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Journal of Robotics and Control (JRC)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik