Tower Planning And Arrangements Mobile Telecommunication District Central Aceh With Methode Fuzzy Clustering

Authors

DOI:

https://doi.org/10.18196/jrc.2144

Keywords:

Cluster, Fuzzy, Telecommunication Tower, Optimization.

Abstract

Advances in technology, especially in the telecommunications industry has been progress rapidly. Various types of cellular communication systems began operating by covering targeted service areas throughout Indonesia even to the corners of the archipelago, operators continue to try to build infrastructure so that service and the quality is increasing. One of the on going infrastructure developments is Base Transceiver Station (BTS). However, BTS development infrastructure must consider the aesthetics and compliance with the Regional Spatial Plan an area to determine the potential location of tower construction optimally. In this paper we propose the Fuzzy Clustering and Harmony Search to optimize the placement of potential new tower locations. In the optimization process using several parameters such as total population, total area, and shared tower needs for the next 5 (five) years. The results of optimization show that needs BTS in 2024 network services require an additional 74 BTS and supported by 21 new towers together.

Author Biographies

Eva Safwani, Universitas Mercubuana, Jakarta

Department Electrical Engineering

Ahmad Firdausi, Universitas Mercubuana, Jakarta

Department Electrical Engineering

Galang Hakim, Universitas Mercubuana, Jakarta

Department Electrical Engineering

References

J. Y. C. Cheah, “Frequency reference in VSAT,” IEEE Trans. Commun., vol. 42, no. 2/3/4, pp. 233–236, Feb. 1994.

X. Chen and J. Yao, “A coherent microwave photonic link With digital phase noise cancellation,” in Microwave Photonics (MWP) and the 2014 9th Asia-Pacific Microwave Photonics Conference (APMP) 2014 International Topical Meeting on, 2014, pp. 438–441.

Y. Hu, H. Dai, and B. Jiang, “Design and implementation of the Base Transceiver Station routing inspection system based on RFID,” in 2010 IEEE International Conference on RFID-Technology and Applications, 2010, no. June, pp. 81–85.

W. W. Wibowo, Y. D. R. W. Astuti, and C. Hudaya, “Solar-Powered Base Transceiver Station,” in 2018 2nd International Conference on Green Energy and Applications (ICGEA), 2018, pp. 108–112.

A. Adriansyah, A. W. Dani, and K. A. Brotoatmodjo, “Power Consumption Optimization in Cooling System using Knowledge Base Temperature System,” in 2018 International Conference on Electrical Engineering and Computer Science (ICECOS), 2018, vol. 17, pp. 135–140.

A. Rizqiawan, E. Gamia, and P. A. Dahono, “Economic Aspect of Hybrid Renewable Energy System for Base Transceiver Station,” in 2019 IEEE 13th International Conference on Telecommunication Systems, Services, and Applications (TSSA), 2019, pp. 102–107.

R. R. Saedudin, R. A. Anugraha, and R. Eka, “The optimization of maintenance time and total site crew for Base Transceiver Station (BTS) maintenance using Reliability Centered Maintenance (RCM) and Life Cycle Cost (LCC),” in 2013 IEEE International Conference on Industrial Engineering and Engineering Management, 2013, no. Lcc, pp. 1304–1308.

S. Kabir, M. S. Islam, M. Aminuzzaman, A. Ahmed, and M. R. H. Khan, “Renewable integrated Hybrid Power Management for Off Grid Base Transceiver Station (BTS): Microcontroller based,” in 2015 International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), 2015, no. May, pp. 1–4.

D. Abidin, “A Hybrid Genetic - Differential Evolution Algorithm (HybGADE) for a Constrained Sequencing Problem,” in 2018 International Conference on Artificial Intelligence and Data Processing (IDAP), 2018, pp. 1–6.

D. Chaudhary, A. K. Tailor, V. P. Sharma, and S. Chaturvedi, “HyGADE: Hybrid of Genetic Algorithm and Differential Evolution Algorithm,” in 2019 10th International Conference on Computing, Communication and Networking Technologies (ICCCNT), 2019, pp. 1–4.

X. Zhou, H. Zhang, and L. Ma, “The influence of process parameters on the surface topography in diamond turning of freeform optics,” 2010 Int. Conf. Mech. Autom. Control Eng. MACE2010, no. 50775099, pp. 3480–3483, 2010.

L. O. Hall and D. B. Goldgof, “Convergence of the Single-Pass and Online Fuzzy C-Means Algorithms,” IEEE Trans. Fuzzy Syst., vol. 19, no. 4, pp. 792–794, Aug. 2011.

T. Celik and H. K. Lee, “Comments on ‘A Robust Fuzzy Local Information C-Means Clustering Algorithm,’” IEEE Trans. Image Process., vol. 22, no. 3, pp. 1258–1261, Mar. 2013.

L. A. Zadeh, “Fuzzy Sets,” Inf. Control, vol. 8, pp. 338–353, 1965.

R. E. Bellman and L. A. Zadeh, “Decision-Making In A Fuzzy Environment Report No ERL-69-8 National Aeronautics And Space Administration,” 1970.

L. A. Zadeh, “The Concept of a Linguistic Variable and its Application to Approximate Reasoning,” Inf. Sci. (Ny)., vol. 8, 1975.

T. Tagaki and M. Sugeno, “Fuzzy Identification of System and its Application to Modeling and Control,” IEEE Trans. Syst. Man Cybern., vol. 15, no. 1, pp. 116–132, 1985.

E. H. Mamdani, M. S. Eng, D. Ph, and I. E. E. E. Mem, “Control & Science Application of fuzzy algorithms for control of simple dynamic plant,” vol. 121, no. 12, pp. 1585–1588, 1974.

Z. Y. Zhao, M. Tomizuka, and S. Isaka, “Fuzzy Gain Scheduling of PID Controllers,” IEEE Trans. Syst. Man Cybern., vol. 23, no. 5, pp. 1392–1398, 1993.

C.-L. HWANG, Y.-J. LAI, and T.-Y. LIU, “A NEW APPROACH FOR MULTIPLE OBJECTIVE,” Comput. Ops Res. Vol. 20, vol. 20, no. 8, pp. 889–899, 1993.

F. Radmehr and N. S. Gharneh, “Forecasting Method Based On High Order Fuzzy Time Series And Simulated Annealing Technique,” South African J. Ind. Eng., vol. 23, no. 2, pp. 176–190, 2012.

B. S. Chissom and S. Qiang, “Practical Experiences with Modelling and Forecasting Time Series,” in The Annual Meeting Of the Mid-South Educational Research Association, 1991.

J. C. Bezdek, Pattern Recognition with Fuzzy Objective Function Algorithms. 1981.

J. M. Haigh and R. G. Caringi, “Automation vs. human intervention: What is the best mix for optimum system performance? A case study,” Int. J. Risk Assess. Manag., vol. 7, no. 5, pp. 708–721, 2007.

M. Alata, M. Molhim, and A. Ramini, “Optimizing of Fuzzy C-Means Clustering Algorithm Using GA,” World Acad. Sci. Eng. Technol., vol. 15, no. October 2016, pp. 224–229, 2008.

O. M. d. Alia, R. Mandava, D. Ramachandram, and M. E. Aziz, “Harmony search-based cluster initialization for fuzzy C-means segmentation of MR images,” IEEE Reg. 10 Annu. Int. Conf. Proceedings/TENCON, no. February, 2009.

R. Siringoringo and J. Jamaluddin, “Peningkatan Performa Cluster Fuzzy C-Means pada Klastering Sentimen Menggunakan Particle Swarm Optimization,” J. Teknol. Inf. dan Ilmu Komput., vol. 6, no. 4, p. 349, 2019.

Y. Feng, H. Lu, W. Xie, H. Yin, and J. Bai, “An Improved Fuzzy C-Means Clustering Algorithm Based on Multi-chain Quantum Bee Colony Optimization,” Wirel. Pers. Commun., vol. 102, no. 2, pp. 1421–1441, 2018.

A. Mauludiyanto and Jiworeno, “Estimasi Zona Menara Baru Pada Komunikasi Selular Di Kabupaten Mojokerto menggunakan Geographic Information System (GIS),” in Seminar Nasional Teknologi Informasi dan Multimedia 2015, 2015, pp. 6–8.

E. Jamil and S. Hameed, “STATCOM-Based Voltage Regulation in Grid Integrated Wind Farm under Variable Loading Conditions,” pp. 0–5, 5093.

Downloads

Published

2021-01-27

How to Cite

[1]
E. Safwani, A. Firdausi, and G. Hakim, “Tower Planning And Arrangements Mobile Telecommunication District Central Aceh With Methode Fuzzy Clustering”, J Robot Control (JRC), vol. 2, no. 1, pp. 7–11, Jan. 2021.

Issue

Vol. 2 No. 1 (2021): January

Section

Articles

License

Authors who publish with this journal agree to the following terms: 

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

 

This journal is based on the work at https://journal.umy.ac.id/index.php/jrc under license from Creative Commons Attribution-ShareAlike 4.0 International License. You are free to:

  1. Share – copy and redistribute the material in any medium or format.
  2. Adapt – remix, transform, and build upon the material for any purpose, even comercially.

The licensor cannot revoke these freedoms as long as you follow the license terms, which include the following:

  1. Attribution. You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
  2. ShareAlike. If you remix, transform, or build upon the material, you must distribute your contributions under the same license as the original.
  3. No additional restrictions. You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.

 

• Creative Commons Attribution-ShareAlike (CC BY-SA)

Creative Commons License
JRC is licensed under an International License