Simulation Model of Servo Motor by Using Matlab

Fatin Nabeel Abdullah, Ghada Adel Aziz, Salam Waley Shneen

Abstract


The research aims to develop documented empirical data to obtain a high-accuracy and effective system according to a principal system as a model that represents the system for all expected cases and different working conditions. The current works are simulating a servo motor that works with specifications as a mathematical representation of it down to its representation with a transformation function. The simulation is done for different cases, the first is without a controller, and the other is an operation simulation with a conventional controller that is with a PID controller. The results, through response and accuracy, prove the preference of PID controller systems in the speed of response and high accuracy with the change or different conditions of the system, i.e., working with linear systems. A simulation is being conducted to verify the use of control systems to improve the performance of servo motors. Algorithms of control systems are developed according to designs based on prior experience. Speed and position control are the most common and used in many applications, which created the need to choose them. To overcome fluctuations and obtain a quick response and a high-precision system used, control systems, as the results proved. The research contribution is developing a design for the user control systems also checking them in simulation with the servo motor system using MATLAB. They test them in the servo motor control as well to test their performance experimentally.

Keywords


Servo Motor; PID Controller; Transfer function; Matlab

Full Text:

PDF

References


K. Kunal, A. Z. Arfianto, J. E. Poetro, F. Waseel, R. A. Atmoko, "Accelerometer Implementation as Feedback on 5 Degree of Freedom Arm Robot," Journal of Robotics and Control (JRC), vol. 1, no. 1, pp. 31-34, 2020.

A. Ma'arif and N. R. Setiawan, "Control of DC Motor Using Integral State Feedback and Comparison with PID: Simulation and Arduino Implementation." Journal of Robotics and Control (JRC), vol. 2, no. 5, 456-461, 2021.

Y. Irawan, M. Muhardi, R. Ordila, and R. Diandra, "Automatic Floor Cleaning Robot Using Arduino and Ultrasonic Sensor," Journal of Robotics and Control (JRC), vol. 2. No. 4, pp. 240-243, 2021.

H. Maghfiroh, I. Iftadi, and A. Sujono, "Speed Control of Induction Motor using LQG," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 565-570, 2021.

R. Kristiyono and W. Wiyono, "Autotuning Fuzzy PID Controller for Speed Control of BLDC Motor," Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 400-407, 2021.

H. Maghfiroh, A. Ramelan, and F. Adriyanto, "Fuzzy-PID in BLDC Motor Speed Control Using MATLAB/Simulink," Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 8-13, 2022.

A. Latif, A. Z. Arfianto, H. A. Widodo, R. Rahim, and E. T. Helmy, "Motor DC PID system regulator for mini conveyor drive based-on MATLAB," Journal of Robotics and Control (JRC), vol. 1, no. 6, pp. 185-190, 2020.

H. J. Pahk, D. S. Lee, and J. H. Park, "Ultra precision positioning system for servo motor–piezo actuator using the dual servo loop and digital filter implementation," International Journal of Machine Tools and Manufacture, vol. 41, no. 1, pp. 51-63, 2001.

M. L. Zegai, M. Bendjebbar, K. Belhadri, M. L. Doumbia, B. Hamane and P. M. Koumba, "Direct torque control of Induction Motor based on artificial neural networks speed control using MRAS and neural PID controller," 2015 IEEE Electrical Power and Energy Conference (EPEC), 2015.

G. Boukhalfa, S. Belkacem, A. Chikhi, and S. Benaggoune, "Direct torque control of dual star induction motor using a fuzzy-PSO hybrid approach," Applied Computing and Informatics, 2020.

A. J. Attiya, Y. Wenyu, and S. W. Shneen, “Fuzzy-PID controller of robotic grinding force servo system," International Journal of Electrical and Computer Engineering (IJECE), vol. 15, no. 1, pp. 87-99, 2015.

A. R. Ajel, H. M. A. Abbas, and M. J. Mnati, "Position and speed optimization of servo motor control through FPGA," International Journal of Electrical & Computer Engineering, vol. 11, no. 1, 2021.

A. Muttaqin, S. D. Finnadi, Z. Abidin, and K. Araki, "FPGA based synchronous multi-channel PWM generator for humanoid robot," International Journal of Electrical & Computer Engineering, vol. 11, no. 1, 2021.

S. W. Shneen, H. H. Kareem, and H. A. Abdulmajeed, "Fuzzy-PI control for speed of PMSM drive system," Journal of Scientific and Engineering Research, vol. 6, pp. 31-35, 2019.

A. S. Ahmed, H. A. Marzog, and L. A. Abdul-Rahaim, "Design and implement of robotic arm and control of moving via IoT with Arduino ESP32," International Journal of Electrical & Computer Engineering, vol. 11, no. 5, 2021.

A. J. Attiya, Y. Wenyu, and S. W. Shneen, "Compared with PI, Fuzzy_PI & PSO_PI Controllers of Robotic Grinding Force Servo System," TELKOMNIKA Indonesian Journal of Electrical Engineering, vol. 1, pp. 65-74, 2015.

A. N. Abdullah and M. H. Ali, "Direct torque control of IM using PID controller," International Journal of Electrical and Computer Engineering, vol. 10, no. 1, p. 617, 2020.

S. W. Shneen, D. H. Shaker, and F. N. Abdullah, "Simulation model of PID for DC-DC converter by using MATLAB," International Journal of Electrical & Computer Engineering, vol. 11, no. 5, 2021.

S. W. Shneen, H. Sh. Dakheel, and Z. B. Abdulla, "Design and implementation of variable and constant load for induction motor," International Journal of Power Electronics and Drive Systems, vol. 11, no. 2, p. 762, 2020.

K. Aseem and K. S. Selva, "Closed loop control of DC-DC converters using PID and FOPID controllers," International Journal of Power Electronics and Drive Systems, vol. 11, no. 3, p. 1323, 2020.

B. B. Acharya, S. Dhakal, A. Bhattarai, and N. Bhattarai, "PID speed control of DC motor using meta-heuristic algorithms," International Journal of Power Electronics and Drive Systems, vol. 12, no. 2, p. 822, 2021.

S. Usha, P. M. Dubey, R. Ramya, and M. V. Suganyadevi, "Performance enhancement of BLDC motor using PID controller," International Journal of Power Electronics and Drive Systems, vol. 12, no. 3, p. 1335, 2021.

S. W. Shneen, A. Z. Salman, Q. A. Jawad, and H. Sharef, "Advanced optimal by PSO-PI for DC motor," Indonesian Journal of Electrical Engineering and Computer Science, vol. 16, no. 1, pp. 165-175, 2019.

M. K. Oudah, M. Q. Sulttan, and S. W. Shneen, "Fuzzy type 1 PID controllers design for TCP/AQM wireless networks," Indonesian Journal of Electrical Engineering and Computer Science, vol. 21, no. 1, pp. 118-127, 2021.

G. Boukhalfa, S. Belkacem, A. Chikhi, and S. Benaggoune, "Genetic algorithm and particle swarm optimization tuned fuzzy PID controller on direct torque control of dual star induction motor," Journal of Central South University, vol. 26, no. 7, pp. 1886-1896, 2019.

M. A. Ghany and M. A. Shamseldin, "Parallel distribution compensation PID based on Takagi-Sugeno fuzzy model applied on Egyptian load frequency control," International Journal of Electrical and Computer Engineering, vol. 10, no. 5, p. 5274, 2020.

A. Sitorus, E. K. Pramono, Y. H. Siregar, A. Rahayuningtyas, N. D. Susanti, I. S. Cebro, and R. Bulan, "Measurement push and pull forces on automatic liquid dispensers," International Journal of Electrical & Computer Engineering, vol. 11, no. 6, 2021.

N. R. B. Hatem, M. Mostefai, and O. E. K. Aktouf, "Extended kalman observer based sensor fault detection," International Journal of Electrical & Computer Engineering, vol. 9, no. 3, 2019.

S. W. Shneen, M. Q. Sulttan, and M. H. Jaber, "Variable speed control for 2Ph-HSM in RGS: a comparative simulation study," International Journal of Electrical and Computer Engineering, vol. 10, no. 3, p. 2285, 2020.

T. Dewi, S. Nurmaini, P. Risma, Y. Oktarina, and M. Roriz, "Inverse kinematic analysis of 4 DOF pick and place arm robot manipulator using fuzzy logic controller," International Journal of Electrical & Computer Engineering, vol. 10, no. 2, 2020.

M. A. Mhawesh, "Performance comparison between variants PID controllers and unity feedback control system for the response of the angular position of the DC motor," International Journal of Electrical and Computer Engineering, vol. 11, no. 1, p. 802, 2021.

F. A. Raheem, B. F. Midhat, and H. S. Mohammed, "PID and fuzzy logic controller design for balancing robot stabilization," Iraqi Journal of Computers, Communications, Control & Systems Engineering (IJCCCE), vol. 18, no. 1, pp. 1-10, 2017.

R. S. Raheem and S. K. Kadhim, "Simulation Design of Blood-pump Intelligent Controller Based on PID-like fuzzy logic Technique," Engineering and Technology Journal, vol. 38, no. 8, pp. 1200-1213, 2020.

A. K. K. A. Raheem, S. W. Shneen, M. H. Jaber, and A. H. Reja, "Design and Simulation of a Second-Order Universal Switched-Capacitor Filter as a 10-Pin Dual-In-Line Package Integrated Circuit," Engineering and Technology Journal, vol. 30, no. 18, pp. 3175-3191, 2012.

C. B. Jabeur and H. Seddik, "Optimized Neural networks-PID Controller with Wind Rejection Strategy for a Quad-rotor," Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 62-72, 2022.

M. Samuel, M. Mohamad, M. Hussein, and S. M. Saad, "Lane keeping maneuvers using proportional integral derivative (PID) and model predictive control (MPC)," Journal of Robotics and Control (JRC), vol. 2, no. 2, pp. 78-82, 2021.

‏H. Maghfiroh, O. Wahyunggoro, A. I. Cahyadi and S. Praptodiyono, "PID-hybrid tuning to improve control performance in speed control f DC motor base on PLC," 2013 3rd International Conference on Instrumentation Control and Automation (ICA), 2013, pp. 233-238.

E. Widya Suseno and A. Ma’arif, “Tuning of PID Controller Parameters with Genetic Algorithm Method on DC Motor,” International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 41–53, Feb. 2021.

D. Sonny Febriyan and R. Dwi Puriyanto, “Implementation of DC Motor PID Control On Conveyor for Separating Potato Seeds by Weight,” International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 15–26, Feb. 2021.




DOI: https://doi.org/10.18196/jrc.v3i2.13959

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 salam Waley shneen

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik