Vicinity Monitoring of Military Vehicle Cabin to Improve Passenger Comfort with Fusion Sensors and LoRa RFM95W

Wildan Muhammad Yasin Fadillah, Giva Andriana Mutiara, Periyadi Periyadi, Muhammad Rizqy Alfarisi, Lisda Meisaroh

Abstract


The application and utilization of technology to measure the level of comfort in mass-produced vehicles, including military vehicles, is constantly evolving. Currently, the testing of comfort parameters is carried out manually through human-driven test drives. Thus, the range of variability in measurements is extensive as it depends on the subjective experiential indications of experts.  This research utilizes KY-037 sensor to measure noise level and BME280 sensor fusion to detect temperature, air pressure, humidity, and altitude.  These parameters have a significant impact on passenger comfort inside the passenger cabin of military vehicles. This project included involves the development of LoRa-based communication medium using RFM95W technology. The system has extensive performance testing inside the passenger cabin of a military vehicle on various test area tracks. The test results indicate that the system is capable of accurately reading the KY-037 sensor, with a range of 80 - 141 dB depending on the tracks. The BME280 sensor consistently measures a temperature of 36,98°C, altitude readings ranging from 667-677 meter above sea level, maintaining a stable air pressure of 955.35 hPa, and measuring the lowest humidity level in the vehicle cabin at 24.34%. The LoRa technology possesses remarkable to extend the communication range, even in challenging environments, reaching distances over 2 kilometers. The response time for data sent in web-based applications consistently remains below 1 second. Thus, this system can assist experts in enhancing cabin passenger comfort standards by narrowing the range and making it more measurable.

Keywords


BME280; Military Vehicle; Long-Range RFM95W; Real-Time; Vicinity Detection; Vehicle Cabin; Web-Based Application; Humidity; Air Pressure; Altitude; Communication.

Full Text:

PDF

References


P. S. Beran, D. Bryson, A. S. Thelen, M. Diez, and A. Serani, “Comparison of Multi-Fidelity Approaches for Military Vehicle Design,” in AIAA AVIATION 2020 FORUM, p. 3158, Jun. 2020, doi: 10.2514/6.2020-3158.

L. Tian, J. Li, and Y. Li, “Analysis of Driving Fatigue Characteristics in Cold and Hypoxia Environment of High-Altitude Areas,” Big Data, vol. 11, no. 4, pp. 255–267, Aug. 2023, doi: 10.1089/big.2021.0464.

S. Wang, H. Li, P. Zhang, J. Tao, H. Zou, and X. Qiu, “An experimental study on the upper limit frequency of global active noise control in car cabins,” Mech. Syst. Signal Process, vol. 201, p. 110672, Oct. 2023, doi: 10.1016/j.ymssp.2023.110672.

M. K. A. M. Zali and S. A. Sulaiman, “Study on Air-Circulation Practices in Car Cabin,” in 2022 7th International Conference on Electric Vehicular Technology (ICEVT), pp. 205–209, Sep. 2022, doi: 10.1109/ICEVT55516.2022.9924780.

S. G. Rajamani, S. A. Neelavara, and A. Thangamani, “Custom Wireless Sensing System for Evaluation of Automotive Cabin Thermal Comfort Metrics,” in 2022 International Conference on Electrical, Computer and Energy Technologies (ICECET), pp. 1–6, Jul. 2022, doi: 10.1109/ICECET55527.2022.9872664.

M.-H. Lu, M. U. Jen, and D. de Klerk, “Case study: Separating source contributions of vehicle interior noise by operational transfer path analysis,” Noise Control Eng. J., vol. 69, no. 1, pp. 39–52, Jan. 2021, doi: 10.3397/1/37694.

M. M. Maassen et al., “Safe and reliable sound threshold measures with direct vibration of the ossicular chain,” Laryngoscope, vol. 114, no. 11 I, pp. 2012–2020, 2004, doi: 10.1097/01.mlg.0000147938.52132.4b.

J. T. McDaniel et al., “Spatiotemporal Trends in Vision Impairment, Hearing Loss, and Executive Dysfunction Among Active-Duty Military Personnel, United States, 2015-2019,” Mil. Med., vol. 188, no. 7–8, pp. e1408–e1415, Jul. 2023, doi: 10.1093/milmed/usab483.

B. C. J. Moore, “Diagnosis and quantification of military noise-induced hearing loss,” J. Acoust. Soc. Am., vol. 148, no. 2, pp. 884–894, Aug. 2020, doi: 10.1121/10.0001789.

J. E. Melzer, A. A. Scharine, and B. E. Amrein, “Soldier Auditory Situation Awareness: The Effects of Hearing Protection, Communications Headsets, and Headgear,” in Designing Soldier Systems, pp. 173–195, 2018, doi: 10.1201/9781315576756-9.

C. Li, F. Yang, and Z. Wang, “Experimental study on high-speed endurance of electric vehicle at normal temperature (25),” E3S Web of Conferences, vol. 268, 2021, doi: 10.1051/e3sconf/202126801032.

K. Gładyszewska-Fiedoruk and T. J. Teleszewski, “Experimental research on the humidity in a passenger car cabin equipped with an air cooling system-development of a simplified model,” Applied Thermal Engineering, vol. 220, p. 119783, 2023, doi: 10.2139/ssrn.4148567.

Z. Liu and J. Liu, “Effect of altitude conditions on combustion and performance of a turbocharged direct-injection diesel engine,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 236, no. 4, pp. 582–593, 2022, doi: 10.1177/09544070211026204.

C. Yuan, Y. Li, H. Huang, S. Wang, Z. Sun, and H. Wang, “Application of explainable machine learning for real-time safety analysis toward a connected vehicle environment,” Accid. Anal. Prev., vol. 171, p. 106681, Jun. 2022, doi: 10.1016/j.aap.2022.106681.

S. Nidhra, “Black Box and White Box Testing Techniques - A Literature Review,” International Journal of Embedded Systems and Applications, vol. 2, no. 2, pp. 29–50, 2012, doi: 10.5121/ijesa.2012.2204.

S. R. Pokhrel and C. Williamson, “Modeling Compound TCP over WiFi for IoT,” IEEE/ACM Transactions on Networking, vol. 26, no. 2, pp. 864–878, 2018, doi: 10.1109/TNET.2018.2806352.

G. A. Mutiara et al., “Integrated Sensor-Based Smart Mannequin for Injury Detection in Armored Vehicle,” International Journal of Safety and Security Engineering, vol. 13, no. 4, pp. 625–633, 2023, doi: 10.18280/ijsse.130404.

C. Vattheuer, C. Liu, A. Abedi, and O. Abari, “Is Z -Wave Reliable for IoT Sensors?,” IEEE Sens. J., vol. 23, no. 24, pp. 31297–31306, Dec. 2023, doi: 10.1109/JSEN.2023.3328014.

A. Fathima, M. Kavipriya, B. Preethi, S. Azhageshwari, B. Manikandan, and S. Prathap, “Virtual Wearable Band Using Zigbee for Iot Application,” ECS Trans., vol. 107, no. 1, pp. 14889–14899, Apr. 2022, doi: 10.1149/10701.14889ecst.

T. Inthasuth, P. Uarchoojitt, W. Boonsong, and N. Kaewthong, “Time-Based Performance Analysis of Narrowband Internet of Things (NB-IoT) for Particulate Matter Monitoring System,” in 2023 International Conference on Electronics, Information, and Communication (ICEIC), pp. 1–4, 2023, doi: 10.1109/ICEIC57457.2023.10049930.

V. K. Sarker, J. P. Queralta, T. N. Gia, H. Tenhunen, and T. Westerlund, “A Survey on LoRa for IoT: Integrating Edge Computing,” in 2019 Fourth International Conference on Fog and Mobile Edge Computing (FMEC), pp. 295–300, 2019, doi: 10.1109/FMEC.2019.8795313.

D. Wu and J. Liebeherr, “A Low-Cost Low-Power LoRa Mesh Network for Large-Scale Environmental Sensing,” IEEE Internet Things J, vol. 10, no. 19, pp. 16700–16714, Oct. 2023, doi: 10.1109/JIOT.2023.3270237.

B. Xie, M. Cui, D. Ganesan, X. Chen, and J. Xiong, “Boosting the Long Range Sensing Potential of LoRa,” in Proceedings of the 21st Annual International Conference on Mobile Systems, Applications and Services, pp. 177–190, 2023, doi: 10.1145/3581791.3596847.

Z. Sun et al., “Low-power wide area network construction method based on lora technology for agricultural science and technology parks,” J. Phys. Conf. Ser., vol. 1673, no. 1, pp. 1–6, 2020, doi: 10.1088/1742-6596/1673/1/012066.

B. Xie, M. Cui, D. Ganesan, and J. Xiong, “Wall Matters: Rethinking the Effect ofWall for Wireless Sensing,” Proc. ACM Interact. Mob. Wearable Ubiquitous Technol., vol. 7, no. 4, 2024, doi: 10.1145/3631417.

X. Zhang, Z. Bao, Y. Yin, X. Yang, X. Xu, and Q. Niu, “LoFall: LoRa-Based Long-Range Through-Wall Fall Detection,” in 2023 IEEE Symposium on Computers and Communications (ISCC), pp. 831–836, 2023, doi: 10.1109/ISCC58397.2023.10218222.

E. C. Tsirogiannis, E. Daskalakis, M. H. Hassan, A. M. Omar, and P. Bartolo, “Ballistic design and testing of a composite armour reinforced by CNTs suitable for armoured vehicles,” Defence Technology, vol. 32, pp. 173-195, 2024, doi: 10.1016/j.dt.2023.04.013.

D. Voicu et al., “Frequency Analysis of Vibrations in Terms of Human Exposure While Driving Military Armoured Personnel Carriers and Logistic Transportation Vehicles,” Electronics (Switzerland), vol. 12, no. 14, Jul. 2023, doi: 10.3390/electronics12143152.

L. Wen, S. Dong, C. Gu, and J.-F. Mao, “A Compact Non-Contact Heart Sound Sensor Based on Millimeter-Wave Radar,” in 2022 IEEE MTT-S International Microwave Biomedical Conference (IMBioC), pp. 305–307, 2022, doi: 10.1109/IMBioC52515.2022.9790257.

M. Stojkov, G. Delija, I. Đuračić, and T. Alinjak, “Air Quality Supervision System using the IoT Platform,” Tehnicki Glasnik, vol. 17, no. 4, pp. 605–613, 2023, doi: 10.31803/TG-20230226194209.

I. P. Sari, A. A. N. Gunawan, I. M. S. Wibawa, I. K. Putra, and M. Yusuf, “Design and Manufacture of Radiosonde Based on Arduino Pro Mini Using BME280 Sensor,” Journal of Engineering Research and Reports, vol. 23, no. 12, pp. 1–9, 2022, doi: 10.9734/jerr/2022/v23i12758.

P. M. Dinesh, B. Y. Bala, S. M. Kumar, R. S. Sabeenian, M. E. Paramasivam, and A. Manjunathan, “Noise Level Notifier,” E3S Web of Conferences, vol. 399, pp. 1–14, 2023, doi: 10.1051/e3sconf/202339904011.

L. E. Humes, “Hearing Thresholds for Unscreened U.S. Adults: Data From the National Health and Nutrition Examination Survey, 2011–2012, 2015–2016, and 2017–2020,” Trends Hear., vol. 27, 2023, doi: 10.1177/23312165231162727.

R. A. N. Rifqah, S. W. Suciyati, A. Surtono, and G. A. Pauzi, “Design of a Classroom Noise Monitoring Tool Using a KY-037 Sound Sensor Based on Wemos D1R1,” Journal of Energy, Material, and Instrumentation Technology, vol. 4, no. 4, pp. 125–135, 2023, doi: 10.23960/jemit.v4i4.118.

“Hearing Threshold,” in Encyclopedia of Autism Spectrum Disorders, Cham: Springer International Publishing, pp. 2325–2325, 2021, doi: 10.1007/978-3-319-91280-6_300781.

S. K. Mishra, U. Saxena, and H. Rodrigo, “Extended High-frequency Hearing Impairment Despite a Normal Audiogram: Relation to Early Aging, Speech-in-noise Perception, Cochlear Function, and Routine Earphone Use,” Ear Hear, vol. 43, no. 3, pp. 822–835, May 2022, doi: 10.1097/AUD.0000000000001140.

A. Ridwan and T. Pangaribowo, “Design of Prototype Aircraft Noise Monitoring System Using Microcontroller,” International Journal of Advanced Technology in Mechanical, Mechatronics and Materials, vol. 2, no. 2, pp. 87–92, 2021, doi: 10.37869/ijatec.v2i2.49.

S. G. Curhan, C. Halpin, M. Wang, R. D. Eavey, and G. C. Curhan, “Prospective Study of Dietary Patterns and Hearing Threshold Elevation,” Am J Epidemiol, vol. 189, no. 3, pp. 204–214, Mar. 2020, doi: 10.1093/aje/kwz223.

E. H. Berger, “Active noise reduction (ANR) in hearing protection: Does it make sense for industrial applications,” in 27th Conference of the National Hearing Conservation Association, 2002.

J. J. Saldana-Barrios, E. Aguilar, W. Ng, and R. Orocu, “Designing an IoT-Based System for Monitoring Noise Levels in the Computer Science Faculty and Library of the Technological University of Panama,” Sensors, vol. 23, no. 22, 2023, doi: 10.3390/s23229083.

E. Levenberg et al., “Live road condition assessment with internal vehicle sensors,” Transp. Res. Rec., vol. 2675, no. 10, pp. 1442–1452, 2021, doi: 10.1177/03611981211016852.

K. Gładyszewska-Fiedoruk and T. J. Teleszewski, “Modeling of Humidity in Passenger Cars Equipped with Mechanical Ventilation,” Energies (Basel), vol. 13, no. 11, p. 2987, Jun. 2020, doi: 10.3390/en13112987.

A. Wadhwa and M. Kalsia, “A Critical Review on Occupant’s Thermal Comfort Inside Electric Vehicle Car Cabin,” in 2023 2nd Edition of IEEE Delhi Section Flagship Conference (DELCON), pp. 1–7, 2023, doi: 10.1109/DELCON57910.2023.10127397.

I. Panfilov, A. N. Beskopylny, and B. Meskhi, “Numerical Simulation of Heat Transfer and Spread of Virus Particles in the Car Interior,” Mathematics, vol. 11, no. 3, 2023, doi: 10.3390/math11030784.

R. Andarini and M. Widjaja, “Monitoring Indoor Air Quality for Thermal Comfort using Internet of Things,” in 2022 Seventh International Conference on Informatics and Computing (ICIC), pp. 1–6, 2022, doi: 10.1109/ICIC56845.2022.10006955.

F. Alanazi, “The spread of COVID-19 at Hot-Temperature Places With Different Curfew Situations Using Copula Models,” in 2021 1st International Conference on Artificial Intelligence and Data Analytics (CAIDA), pp. 268–270, 2021, doi: 10.1109/CAIDA51941.2021.9425301.

J. B. Kim and M. S. Kang, “The monitoring system of temperature and humidity on vehicle for HACCP,” Journal of Advanced Navigation Technology, vol. 22, no. 2, pp. 168-172, 2018.

R. A. Angelova, D. G. Markov, I. Simova, R. Velichkova, and P. Stankov, “Accumulation of metabolic carbon dioxide (CO2) in a vehicle cabin,” IOP Conf. Ser. Mater. Sci. Eng., vol. 664, no. 1, p. 012010, Oct. 2019, doi: 10.1088/1757-899X/664/1/012010.

V. Perez-Gracia, S. Santos-Assuncao, V. Sossa, and M. Solla, “Assessment of humidity damage in cultural heritage,” in 2021 11th International Workshop on Advanced Ground Penetrating Radar (IWAGPR), pp. 1–6, 2021, doi: 10.1109/IWAGPR50767.2021.9843177.

P. Li, J. Liu, M. Chen, F. Wang, R. Yuen, and J. Wang, “Experimental study of high altitude effect on heat release rates of pool fires using calorimeters,” J. Therm. Anal. Calorim., vol. 131, no. 2, pp. 1597–1603, Feb. 2018, doi: 10.1007/s10973-017-6637-1.

Y. Xu, G. Yu, Y. Wang, X. Wu, and Y. Ma, “Car detection from low-altitude UAV imagery with the faster R-CNN,” J. Adv. Transp., vol. 2017, 2017, doi: 10.1155/2017/2823617.

M. Bertone et al., “Experimental Characterization of the Airflow within a Car Cabin,” J. Phys. Conf. Ser., vol. 2509, no. 1, 2023, doi: 10.1088/1742-6596/2509/1/012024.

L. Qiu, H. Zhou, Z. Wang, S. Zhang, L. Zhang, and W. Lou, “High-speed elevator car air pressure compensation method based on coupling analysis of internal and external flow fields,” Applied Sciences (Switzerland), vol. 11, no. 4, pp. 1–26, 2021, doi: 10.3390/app11041700.

W. Suparta, A. Warsita, and Ircham, “A low-cost development of automatic weather station based on Arduino for monitoring precipitable water vapor,” Indonesian Journal of Electrical Engineering and Computer Science, vol. 24, no. 2, pp. 744–753, 2021, doi: 10.11591/ijeecs.v24.i2.pp744-753.

D. H. Effendi, L. Kamelia, A. Faroqi, and M. I. Z. Ulhaq, “Pepper Greenhouse Condition Control System Using the Proportional Integral Derivative (PID) Methods,” in 2022 8th International Conference on Wireless and Telematics (ICWT), pp. 1–5, 2022, doi: 10.1109/ICWT55831.2022.9935345.

M. D. Djordjevic, J. M. Vracar, and A. S. Stojkovic, “Supervision and Monitoring System of the Power Line Poles Using IIoT Technology,” in 2020 55th International Scientific Conference on Information, Communication and Energy Systems and Technologies (ICEST), pp. 58–61, 2020, doi: 10.1109/ICEST49890.2020.9232909.

S. Srilakshmipathy, R. Abhishek, and Deepa, “Temperature and Humidity Monitoring in Silo,” in 2021 International Conference on Recent Trends on Electronics, Information, Communication & Technology (RTEICT), pp. 55–59, 2021, doi: 10.1109/RTEICT52294.2021.9573918.

W. S. B, A. Setiawan, A. Budiarto, and Y. Suprapto, Proceedings of the International Conference on Advance Transportation, Engineering, and Applied Science (ICATEAS 2022), vol. 1, 2023, doi: 10.2991/978-94-6463-092-3.

G. V. Shevchenko, N. A. Glubokov, A. V. Yupashevsky, and A. S. Kazmina, “Air flow sensor based on environmental sensor BME280,” International Conference of Young Specialists on Micro/Nanotechnologies and Electron Devices, EDM, vol. 2020, pp. 432–435, 2020, doi: 10.1109/EDM49804.2020.9153474.

S. Deniziak, M. Płaza, and Ł. Arcab, “Approach for Designing Real-Time IoT Systems,” Electronics (Switzerland), vol. 11, no. 24, 2022, doi: 10.3390/electronics11244120.

G. A. Mutiara, N. Suryana, and O. Bin Mohd, “Wireless sensor network for illegal logging application: A systematic literature review,” J. Theor. Appl. Inf. Technol., vol. 97, no. 1, pp. 302–313, 2019.

B. Veerasamy, B. G. Durga, T. H. M. Kumaran, I. V. Devika, and M. J. Akshaya, “Soldier Health Detection and Position Tracking System using LoRaWAN Sensor for Low Power and Long-Range Access,” in 2023 7th International Conference on Trends in Electronics and Informatics (ICOEI), pp. 9–13, 2023, doi: 10.1109/ICOEI56765.2023.10125644.

H. A. H. Alobaidy et al., “Low-Altitude-Platform-Based Airborne IoT Network (LAP-AIN) for Water Quality Monitoring in Harsh Tropical Environment,” IEEE Internet Things J., vol. 9, no. 20, pp. 20034–20054, Oct. 2022, doi: 10.1109/JIOT.2022.3171294.

M. Rademacher, H. Linka, T. Horstmann, and M. Henze, “Path Loss in Urban LoRa Networks: A Large-Scale Measurement Study,” 2021 IEEE 94th Vehicular Technology Conference (VTC2021-Fall), pp. 1-6, 2021, doi: 10.1109/VTC2021-Fall52928.2021.9625531.

G. A. Mutiara, O. Mohd, N. Suryana, and A. N. C. Pee, “Weights-Based Energy-Efficient Wireless Sensor Network Protocol with Firefly Synchronization for Illegal Logging,” International Journal of Intelligent Engineering and Systems, vol. 14, no. 3, pp. 374–387, 2021, doi: 10.22266/ijies2021.0630.31.

I. Francis and S. Mohd Shah, “Cost-Effective Arduino-Based RFID Automated Cage Door and Pet Tagging with GPS Tracker using Peer-to-Peer LoRa WAN,” Journal of Electronic Voltage and Application, vol. 3, no. 2, pp. 47–58, 2022, doi: 10.30880/jeva.2022.03.02.005.

P. D. P. Adi and A. Kitagawa, “Performance Evaluation of Low Power Wide Area (LPWA) LoRa 920 MHz Sensor Node to Medical Monitoring IoT Based,” in 2020 10th Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), pp. 278–283, 2020, doi: 10.1109/EECCIS49483.2020.9263418.

X. Xianyu, “Application of Lora technology in smart home of Internet of Things,” in 3rd International Conference on Internet of Things and Smart City (IoTSC 2023, p. 95, 2023, doi: 10.1117/12.2684023.

J. Souifi, Y. Bouslimani, M. Ghribi, A. Kaddouri, T. Boutot, and H. H. Abdallah, “Smart Home Architecture based on LoRa Wireless Connectivity and LoRaWAN® Networking Protocol,” in 020 1st International Conference on Communications, Control Systems and Signal Processing (CCSSP), pp. 95–99, 2020, doi: 10.1109/CCSSP49278.2020.9151815.

Md. Shahjalal, Moh. K. Hasan, Md. M. Islam, Md. M. Alam, Md. F. Ahmed, and Y. M. Jang, “An Overview of AI-Enabled Remote Smart- Home Monitoring System Using LoRa,” in 2020 International Conference on Artificial Intelligence in Information and Communication (ICAIIC), pp. 510–513, 2020, doi: 10.1109/ICAIIC48513.2020.9065199.

A. Pagano, D. Croce, I. Tinnirello, and G. Vitale, “A Survey on LoRa for Smart Agriculture: Current Trends and Future Perspectives,” IEEE Internet Things J., vol. 10, no. 4, pp. 3664–3679, 2023, doi: 10.1109/JIOT.2022.3230505.

F. Rebaudo et al., “A low-cost IoT network to monitor microclimate variables in ecosystems,” Methods Ecol. Evol., vol. 14, no. 4, pp. 1025–1034, 2023, doi: 10.1111/2041-210X.14062.

S. Khriji, O. K. Gunyeli, D. El Houssaini, and O. Kanoun, “Energy-Efficient Short-Long Range Communication Network Combining LoRa and Low-Power Radio for Large-Scale IoT Applications,” in 2022 IEEE 9th International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), pp. 1–6, 2022, doi: 10.1109/CIVEMSA53371.2022.9853705.

J. Breitegger, C. Raffelsberger, S. S. Borkotoky, I. Rogler, and C. Bettstetter, “Long-Term LoRa Experiments in a Chemical Plant,” in 2021 22nd IEEE International Conference on Industrial Technology (ICIT), pp. 1–6, 2021, doi: 10.1109/ICIT46573.2021.9453474.

P. Mayer, M. Magno, T. Brunner, and L. Benini, “LoRa vs. LoRa: In-Field Evaluation and Comparison For Long-Lifetime Sensor Nodes,” in 2019 IEEE 8th International Workshop on Advances in Sensors and Interfaces (IWASI), pp. 307–311, 2019, doi: 10.1109/IWASI.2019.8791362.

R. Berto, P. Napoletano, and M. Savi, “A LoRa-Based Mesh Network for Peer-to-Peer Long-Range Communication,” Sensors, vol. 21, no. 13, p. 4314, 2021.

S. Khatoon and M. H. Kim, “Human thermal comfort and heat removal efficiency for ventilation variants in passenger cars,” Energies (Basel), vol. 10, no. 11, Nov. 2017, doi: 10.3390/en10111710.

C. Feng, F. Ma, R. Wang, W. Li, and J. Gao, “A thermal comfort evaluation on vehicular environments based on local human body thermal sensations,” Results in Engineering, vol. 17, Mar. 2023, doi: 10.1016/j.rineng.2023.100907.

B. Salahi, A. Kashani, and V. Safarianzengir, “Investigation and analysis of climate change and siberian high-pressure system during drought and wet periods in the Iranian plateau,” Modeling Earth Systems and Environment, vol. 6, pp. 1695-1706, 2020.

C. H. Huang, H. H. Tsai, and H. C. Chen, “Influence of weather factors on thermal comfort in subtropical urban environments,” Sustainability (Switzerland), vol. 12, no. 5, Mar. 2020, doi: 10.3390/su12052001.

J. Li, X. Wu, S. K. W. Chow, Q. Zhuang, and G. Habert, “Thermal Comfort Comparison and Cause Analysis of Low-Temperature High-Humidity Indoor Environments of Rural Houses in Gansu Province, China,” Sustainability, vol. 15, no. 23, p. 16428, Nov. 2023, doi: 10.3390/su152316428.




DOI: https://doi.org/10.18196/jrc.v5i5.21600

Refbacks

  • There are currently no refbacks.


Copyright (c) 2024 Wildan Muhammad Yasin Fadillah, Giva Andriana Mutiara, Periyadi, Muhammad Rizqy Alfarisi, Lisda Meisaroh

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik