Predicting SI Engine Performance Using Deep Learning with CNNs on Time-Series Data
Abstract
In this study, deep learning (DL) model is used to predict brake power (BP) of GX35-OHC 4-stroke, air-cooled, single-cylinder gasoline engine. The engine uses E15 (85% gasoline + 15% ethanol) as a fuel due to its high performance and low emissions. A convolutional neural networks (CNN) model is used on time-series data due to their ability to capture temporal patterns and relationships in sequential data, such as engine BP. While studying the performance of the network, it is found that the root mean squared error (RMSE) is 0.0007, explained variance score (EVS) is 0.9999, and mean absolute percentage error (MAPE) is 0.22%. Compared to traditional machine leaning methods, these metrics demonstrate the high accuracy and reliability of the model, confirming its effectiveness in predicting BP. Various performance curves are plotted such as comparing target and predicted values, regression plots (to indicate the generalization capability), learning curve (to demonstrate the model's effective training progress and convergence), Bland-Altman plot (to show the convergence between the actual and predicted values), histogram and density plot (to show a close fit between predicted and actual values), density plot of actual and predicted outputs, and residual plot (to show randomly distributed errors). This high accuracy and reliability of this DL model help in effective real-time engine performance monitoring, and reducing emission levels, especially for the adoption and use of renewable fuels like E15.
Keywords
Full Text:
PDFReferences
I. Vinoth Kanna, M. Arulprakasajothi, and S. Eliyas, “A detailed study of IC engines and a novel discussion with comprehensive view of alternative fuels used in petrol and diesel engines,” International Journal of Ambient Energy, vol. 42, no. 15, pp. 1794–1802, 2021, doi: 10.1080/01430750.2019.1614994.
İ. Temizer, Ö. Cihan, and B. Eskici, “Numerical and experimental investigation of the effect of biodiesel/diesel fuel on combustion characteristics in CI engine,” Fuel, vol. 270, 2020, doi: 10.1016/j.fuel.2020.117523.
Y. Li, F. Yang, X. Linxun, J. Liu, J. Wang, and X. Duan, “Influences of the control parameters and spark plug configurations on the performance of a natural gas spark-ignition engine,” Fuel, vol. 324, p. 124728, 2022, doi: 10.1016/j.fuel.2022.124728.
R. G. Papagiannakis, C. D. Rakopoulos, D. T. Hountalas, and D. C. Rakopoulos, “Emission characteristics of high speed, dual fuel, compression ignition engine operating in a wide range of natural gas/diesel fuel proportions,” Fuel, vol. 89, no. 7, pp. 1397–1406, 2010, doi: 10.1016/j.fuel.2009.11.001.
E. G. Giakoumis, “Diesel and spark ignition engines emissions and after-treatment control: Research and advancements,” Energies, vol. 10, no. 11, pp. 3–6, 2017, doi: 10.3390/en10111882.
N. Ghazaly and M. Salah Hofny, “Injection and Combustion of biodiesel at different blends: A review,” SVU-International Journal of Engineering Sciences and Applications, vol. 3, no. 2, pp. 37–46, 2022, doi: 10.21608/svusrc.2022.130956.1043.
F. Leach, G. Kalghatgi, R. Stone, and P. Miles, “The scope for improving the efficiency and environmental impact of internal combustion engines,” Transportation Engineering, vol. 1, 2020, doi: 10.1016/j.treng.2020.100005.
R. D. Reitz et al., “IJER editorial: The future of the internal combustion engine,” International Journal of Engine Research, vol. 21, no. 1, pp. 3–10, 2020, doi: 10.1177/1468087419877990.
Z. Stępień, “A comprehensive overview of hydrogen-fueled internal combustion engines: Achievements and future challenges,” Energies, vol. 14, no. 20, 2021, doi: 10.3390/en14206504.
X. Zhen, Y. Wang, and D. Liu, “Bio-butanol as a new generation of clean alternative fuel for SI (spark ignition) and CI (compression ignition) engines,” Renewable Energy, vol. 147, pp. 2494–2521, 2020, doi: 10.1016/j.renene.2019.10.119.
V. Pandey, I. A. Badruddin, and T. M. Y. Khan, “Effect of H2 blends with compressed natural gas on emissions of SI engine having modified ignition timings,” Fuel, vol. 321, p. 123930, 2022, doi: 10.1016/j.fuel.2022.123930.
K. Chandrasekar, S. Sudhakar, R. Rajappan, S. Senthil, and P. Balu, “Present developments and the reach of alternative fuel: A review,” Materials Today: Proceedings, vol. 51, pp. 74–83, 2021, doi: 10.1016/j.matpr.2021.04.505.
D. Li et al., “Study on combustion and emissions of a hydrous ethanol/gasoline dual fuel engine with combined injection,” Fuel, vol. 309, p. 122004, 2022, doi: 10.1016/j.fuel.2021.122004.
M. S. Hofny and N. M. Ghazaly, “A Review on Artificial Neural Network and Alternative Fuels for Internal Combustion Engines,” International Journal on Recent Technologies in Mechanical and Electrical Engineering, vol. 9, no. 3, pp. 44–58, 2022.
F. J. Joseph Shobana Bai, K. Shanmugaiah, A. Sonthalia, Y. Devarajan, and E. G. Varuvel, “Application of machine learning algorithms for predicting the engine characteristics of a wheat germ oil–Hydrogen fuelled dual fuel engine,” International Journal of Hydrogen Energy, vol. 48, no. 60, pp. 23308–23322, 2023, doi: 10.1016/j.ijhydene.2022.11.101.
Y. Zhang et al., “The Prediction of Spark-Ignition Engine Performance and Emissions Based on the SVR Algorithm,” Processes, vol. 10, no. 2, 2022, doi: 10.3390/pr10020312.
M. A. Hassan, H. Salem, N. Bailek, and O. Kisi, “Random Forest Ensemble-Based Predictions of On-Road Vehicular Emissions and Fuel Consumption in Developing Urban Areas,” Sustainability (Switzerland) , vol. 15, no. 2, pp. 1–22, 2023, doi: 10.3390/su15021503.
X. Ding, C. Feng, P. Yu, K. Li, and X. Chen, “Gradient boosting decision tree in the prediction of NOx emission of waste incineration,” Energy, vol. 264, 2023, doi: 10.1016/j.energy.2022.126174.
M. A. Hashim, M. H. Nasef, A. E. Kabeel, and N. M. Ghazaly, “Combustion fault detection technique of spark ignition engine based on wavelet packet transform and artificial neural network,” Alexandria Engineering Journal, vol. 59, no. 5, pp. 3687–3697, 2020, doi: 10.1016/j.aej.2020.06.023.
T. Johnson and A. Joshi, “Review of Vehicle Engine Efficiency and Emissions,” SAE International Journal of Engines, vol. 11, no. 6, pp. 1307–1330, 2018, doi: 10.4271/2018-01-0329.
M. A. Hashim, M. H. Nasef, A. E. Kabeel, and N. M. Ghazaly, “Combustion fault detection technique of spark ignition engine based on wavelet packet transform and artificial neural network,” Alexandria Engineering Journal, vol. 59, no. 5, pp. 3687–3697, 2020, doi: 10.1016/j.aej.2020.06.023.
M. Munadi, M. Ariyanto, M. Muchammad, and J. D. Setiawan, “Optimal Engine Mapping Performances for Dual Spark-Plug Ignition Internal Combustion Engine Using Neural Network,” Journal of Applied Engineering Science, vol. 20, no. 1, pp. 195–205, 2022, doi: 10.5937/jaes0-28542.
G. J. Thompson, C. M. Atkinson, N. N. Clark, T. W. Long, and E. Hanzevack, “Technical Note: Neural network modelling of the emissions and performance of a heavy-duty diesel engine,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 214, no. 2, pp. 111–126, 2000, doi: 10.1177/095440700021400201.
S. Bhowmik, R. Panua, S. K. Ghosh, A. Paul, and D. Debroy, “Prediction of performance and exhaust emissions of diesel engine fuelled with adulterated diesel: An artificial neural network assisted fuzzy-based topology optimization,” Energy and Environment, vol. 29, no. 8, pp. 1413–1437, 2018, doi: 10.1177/0958305X18779576.
H. Yaşar, G. Çağıl, O. Torkul, and M. Şişci, “Cylinder Pressure Prediction of An HCCI Engine Using Deep Learning,” Chinese Journal of Mechanical Engineering (English Edition), vol. 34, no. 1, 2021, doi: 10.1186/s10033-020-00525-4.
N. Kuzhagaliyeva, A. Thabet, E. Singh, B. Ghanem, and S. M. Sarathy, “Using deep neural networks to diagnose engine pre-ignition,” Proceedings of the Combustion Institute, vol. 38, no. 4, pp. 5915–5922, 2021, doi: 10.1016/j.proci.2020.10.001.
A. Mat Deris, A. Mohd Zain, and R. Sallehuddin, “Overview of support vector machine in modeling machining performances,” Procedia Engineering, vol. 24, pp. 308–312, 2011, doi: 10.1016/j.proeng.2011.11.2647.
R. Fabrice and N. Villa, “Support vector machine for functional data classification,” Neurocomputing, vol. 69, no. 7-9 SPEC. ISS., pp. 730–742, 2006, doi: 10.1016/j.neucom.2005.12.010.
B. Liu, J. Hu, F. Yan, R. F. Turkson, and F. Lin, “A novel optimal support vector machine ensemble model for NOX emissions prediction of a diesel engine,” Measurement: Journal of the International Measurement Confederation, vol. 92, no. 10, pp. 183–192, 2016, doi: 10.1016/j.measurement.2016.06.015.
Y. Guo, Y. Liu, A. Oerlemans, S. Lao, S. Wu, and M. S. Lew, “Deep learning for visual understanding: A review,” Neurocomputing, vol. 187, pp. 27–48, 2016, doi: 10.1016/j.neucom.2015.09.116.
Y. Lecun, Y. Bengio, and G. Hinton, “Deep learning,” Nature, vol. 521, no. 7553, pp. 436–444, 2015, doi: 10.1038/nature14539.
S. Hussain, S. Gaftandzhieva, M. Maniruzzaman, R. Doneva, and Z. F. Muhsin, “Regression analysis of student academic performance using deep learning,” Education and Information Technologies, vol. 26, no. 1, pp. 783–798, 2021, doi: 10.1007/s10639-020-10241-0.
W. Ma et al., “A deep convolutional neural network approach for predicting phenotypes from genotypes,” Planta, vol. 248, no. 5, pp. 1307–1318, 2018, doi: 10.1007/s00425-018-2976-9.
Z. B. Kizilkan, M. S. Sivri, I. Yazici, and O. F. Beyca, Neural Networks and Deep Learning. 2022. doi: 10.1007/978-3-030-93823-9_5.
M. Azimi, A. D. Eslamlou, and G. Pekcan, Data-driven structural health monitoring and damage detection through deep learning: State-ofthe- art review, vol. 20, no. 10, 2020, doi: 10.3390/s20102778.
S. Sengupta et al., “A review of deep learning with special emphasis on architectures, applications and recent trends,” Knowledge-Based Systems, vol. 194, p. 105596, 2020, doi: 10.1016/j.knosys.2020.105596.
A. J. Astell et al., “Using a touch screen computer to support relationships between people with dementia and caregivers,” Interacting with Computers, vol. 22, no. 4, pp. 267–275, 2010, doi: 10.1016/j.intcom.2010.03.003.
G. Nguyen et al., “Machine Learning and Deep Learning frameworks and libraries for large-scale data mining: a survey,” Artificial Intelligence Review, vol. 52, no. 1, pp. 77–124, 2019, doi: 10.1007/s10462-018-09679-z.
S. Kabir, S. Patidar, X. Xia, Q. Liang, J. Neal, and G. Pender, “A deep convolutional neural network model for rapid prediction of fluvial flood inundation,” Journal of Hydrology, vol. 590, 2020, doi: 10.1016/j.jhydrol.2020.125481.
L. Eren, T. Ince, and S. Kiranyaz, “A Generic Intelligent Bearing Fault Diagnosis System Using Compact Adaptive 1D CNN Classifier,” Journal of Signal Processing Systems, vol. 91, no. 2, pp. 179–189, 2019, doi: 10.1007/s11265-018-1378-3.
J. Burner, L. Schwiedrzik, M. Krykunov, J. Luo, P. G. Boyd, and T. K. Woo, “High-performing deep learning regression models for predicting low-pressure CO2 adsorption properties of metal−organic frameworks,” Journal of Physical Chemistry C, vol. 124, no. 51, pp. 27996–28005, 2020, doi: 10.1021/acs.jpcc.0c06334.
Ü. Ağbulut, A. E. Gürel, and S. Sarıdemir, “Experimental investigation and prediction of performance and emission responses of a CI engine fuelled with different metal-oxide based nanoparticles–diesel blends using different machine learning algorithms,” Energy, vol. 215, 2021, doi: 10.1016/j.energy.2020.119076.
S. Shin, S. Lee, M. Kim, J. Park, and K. Min, “Deep learning procedure for knock, performance and emission prediction at steady-state condition of a gasoline engine,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, vol. 234, no. 14, pp. 3347–3361, 2020, doi: 10.1177/0954407020932690.
W. Lee, T. Y. Jung, and S. Lee, “Dynamic Characteristics Prediction Model for Diesel Engine Valve Train Design Parameters Based on Deep Learning,” Electronics (Switzerland), vol. 12, no. 8, 2023, doi: 10.3390/electronics12081806.
L. Pulvirenti, L. Rolando, and F. Millo, “Energy management system optimization based on an LSTM deep learning model using vehicle speed prediction,” Transportation Engineering, vol. 11, p. 100160, 2023, doi: 10.1016/j.treng.2023.100160.
S. Cantero-Chinchilla, C. A. Simpson, A. Ballisat, A. J. Croxford, and P. D. Wilcox, “Convolutional neural networks for ultrasound corrosion profile time series regression,” NDT and E International, vol. 133, p. 102756, 2023, doi: 10.1016/j.ndteint.2022.102756.
Q. Dou, H. Luo, Z. Zhang, Y. Song, S. Chu, and Z. Mao, “A lightweight deep learning-based method for health diagnosis of internal combustion engines on an internet of vehicles platform,” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2023, doi: 10.1177/09544070231198905.
V. Vellandi, P. Namani, S. S. Bagavathy, and M. C. Mahindra, “Only Prevot for Distritio Pr for Distribution,” pp. 1–5, 2020, doi: 10.4271/2023-01-0066.
H. Tajima, T. Tomidokoro, and T. Yokomori, “Deep Learning for Knock Occurrence Prediction in SI Engines,” Energies, vol. 15, no. 24, 2022, doi: 10.3390/en15249315.
M. Rana, S. Sethuvenkatraman, R. Heidari, and S. Hands, “Solar thermal generation forecast via deep learning and application to buildings cooling system control,” Renewable Energy, vol. 196, pp. 694–706, 2022, doi: 10.1016/j.renene.2022.07.005.
J. Liao et al., “A comparative investigation of advanced machine learning methods for predicting transient emission characteristic of diesel engine,” Fuel, vol. 350, 2023, doi: 10.1016/j.fuel.2023.128767.
W. He et al., “Progress in prediction of remaining useful life of hydrogen fuel cells based on deep learning,” Renewable and Sustainable Energy Reviews, vol. 192, p. 114193, 2024, doi: 10.1016/j.rser.2023.114193.
J. F. Torres, D. Hadjout, A. Sebaa, F. Martínez-Álvarez, and A. Troncoso, “Deep Learning for Time Series Forecasting: A Survey,” Big Data, vol. 9, no. 1, pp. 3–21, 2021, doi: 10.1089/big.2020.0159.
A. N. Shmroukh and S. Ookawara, “Evaluation of transparent acrylic stepped solar still equipped with internal and external reflectors and copper fins,” Thermal Science and Engineering Progress, vol. 18, p. 100518, 2020, doi: 10.1016/j.tsep.2020.100518.
A. O. Hasan, H. Al-Rawashdeh, A. H. Al-Muhtaseb, A. Abu-jrai, R. Ahmad, and J. Zeaiter, “Impact of changing combustion chamber geometry on emissions, and combustion characteristics of a single cylinder SI (spark ignition) engine fueled with ethanol/gasoline blends,” Fuel, vol. 231, pp. 197–203, 2018, doi: 10.1016/j.fuel.2018.05.045.
A. O. Hasan, H. Al-Rawashdeh, A. Abu-jrai, M. R. Gomaa, and F. Jamil, “Impact of variable compression ratios on engine performance and unregulated HC emitted from a research single cylinder engine fueled with commercial gasoline,” International Journal of Hydrogen Energy, vol. 48, no. 68, pp. 26619–26628, 2023, doi: 10.1016/j.ijhydene.2022.09.025.
M. S. Hofny et al., “Evaluation of ethanol-gasoline blends in SI engines using experimental and ANN techniques Evaluation of ethanol-gasoline blends in SI engines using experimental and ANN techniques,” Engineering Research Express, vol. 6, 2024, doi: 10.1088/2631-8695/ad5f18.
L. Zhong, L. Hu, and H. Zhou, “Deep learning based multi-temporal crop classification,” Remote Sensing of Environment, vol. 221, pp. 430–443, 2019, doi: 10.1016/j.rse.2018.11.032.
M. G. Ragab, S. J. Abdulkadir, and N. Aziz, “Random Search One Dimensional CNN for Human Activity Recognition,” 2020 International Conference on Computational Intelligence, ICCI 2020, pp. 86–91, 2020, doi: 10.1109/ICCI51257.2020.9247810.
H. Gholamalinezhad and H. Khosravi, “Pooling Methods in Deep Neural Networks, a Review,” arXiv preprint arXiv:2009.07485, 2020.
C. C. Chen, Z. Liu, G. Yang, C. C. Wu, and Q. Ye, “An improved fault diagnosis using 1d-convolutional neural network model,” Electronics (Switzerland), vol. 10, no. 1, pp. 1–19, 2021, doi: 10.3390/electronics10010059.
G. Wang, J. C. Ye, K. Mueller, and J. A. Fessler, “Image Reconstruction is a New Frontier of Machine Learning,” IEEE Transactions on Medical Imaging, vol. 37, no. 6, pp. 1289–1296, 2018, doi: 10.1109/TMI.2018.2833635.
Y. Yang, Q. M. J. Wu, X. Feng, and T. Akilan, “Recomputation of the dense layers for performance improvement of DCNN,” IEEE Transactions on Pattern Analysis and Machine Intelligence, vol. 42, no. 11, pp. 2912–2925, 2020, doi: 10.1109/TPAMI.2019.2917685.
M. Thoma, “Analysis and Optimization of Convolutional Neural Network Architectures,” arXiv preprint arXiv:1707.09725, 2017.
D. M. Pelt and J. A. Sethian, “A mixed-scale dense convolutional neural network for image analysis,” Proceedings of the National Academy of Sciences of the United States of America, vol. 115, no. 2, pp. 254–259, 2017, doi: 10.1073/pnas.1715832114.
S. Chauhan, M. Sharma, M. K. Arora, and N. K. Gupta, “Landslide susceptibility zonation through ratings derived from artificial neural network,” International Journal of Applied Earth Observation and Geoinformation, vol. 12, no. 5, pp. 340–350, 2010, doi: 10.1016/j.jag.2010.04.006.
S. Sharma, S. Sharma, and A. Athaiya, “Activation Functions in Neural Networks,” International Journal of Engineering Applied Sciences and Technology, vol. 4, no. 12, pp. 310–316, 2020, doi: 10.33564/ijeast.2020.v04i12.054.
M. L. Dering and C. S. Tucker, “A Convolutional Neural Network Model for Predicting a Product’s Function, Given Its Form,” Journal of Mechanical Design, vol. 139, no. 11, 2017, doi: 10.1115/1.4037309.
Y.-S. Kim, M. K. Kim, N. Fu, J. Liu, J. Wang, and J. Srebric, “Investigating the Impact of Data Normalization Methods on Predicting Electricity Consumption in a Building Using different Artificial Neural Network Models.,” Sustainable Cities and Society, p. 105570, 2024, doi: 10.1016/j.scs.2024.105570.
Preeti, R. Bala, and R. P. Singh, “A dual-stage advanced deep learning algorithm for long-term and long-sequence prediction for multivariate financial time series,” Applied Soft Computing, vol. 126, p. 109317, 2022, doi: 10.1016/j.asoc.2022.109317.
X. Tang, H. Yao, Y. Sun, C. Aggarwal, P. Mitra, and S. Wang, “Joint modeling of local and global temporal dynamics for multivariate time series forecasting with missing values,” AAAI 2020 - 34th AAAI Conference on Artificial Intelligence, pp. 5956–5963, 2020, doi: 10.1609/aaai.v34i04.6056.
S. Marsi, J. Bhattacharya, R. Molina, and G. Ramponi, “A non-linear convolution network for image processing,” Electronics (Switzerland), vol. 10, no. 2, pp. 1–21, 2021, doi: 10.3390/electronics10020201.
J. Wang, T. Jiang, Z. Cui, and Z. Cao, “Filter pruning with a feature map entropy importance criterion for convolution neural networks compressing,” Neurocomputing, vol. 461, pp. 41–54, 2021, doi: 10.1016/j.neucom.2021.07.034.
V. Varghese, M. Chikaraishi, and J. Urata, “Deep Learning in Transport Studies: A Meta-analysis on the Prediction Accuracy,” Journal of Big Data Analytics in Transportation, vol. 2, no. 3, pp. 199–220, 2020, doi: 10.1007/s42421-020-00030-z.
S. Zhang et al., “An investigation of CNN models for differentiating malignant from benign lesions using small pathologically proven datasets,” Computerized Medical Imaging and Graphics, vol. 77, p. 101645, 2019, doi: 10.1016/j.compmedimag.2019.101645.
S. B. Navathe, W. Wu, S. Shekhar, X. Du, X. Sean Wang, and H. Xiong, “Database Systems for Advanced Applications: 21st International Conference, DASFAA 2016 Dallas, TX, USA, April 16–19, 2016 Proceedings, Part I,” Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), vol. 9642, pp. 214–228, 2016, doi: 10.1007/978-3-319-32025-0.
K. H. Ng, Y. S. Gan, C. K. Cheng, K. H. Liu, and S. T. Liong, “Integration of machine learning-based prediction for enhanced Model’s generalization: Application in photocatalytic polishing of palm oil mill effluent (POME),” Environmental Pollution, vol. 267, p. 115500, 2020, doi: 10.1016/j.envpol.2020.115500.
S. Mittal, “A Survey on optimized implementation of deep learning models on the NVIDIA Jetson platform,” Journal of Systems Architecture, vol. 97, pp. 428–442, 2019, doi: 10.1016/j.sysarc.2019.01.011.
D. Kilichev, D. Turimov, and W. Kim, “Next–Generation Intrusion Detection for IoT EVCS: Integrating CNN, LSTM, and GRU Models,” Mathematics, vol. 12, no. 4, 2024, doi: 10.3390/math12040571.
R. Maskeliūnas, A. Kulikajevas, R. Damaševičius, J. Griškevičius, and A. Adomavičienė, “Biomac3D: 2D-to-3D Human Pose Analysis Model for Tele-Rehabilitation Based on Pareto Optimized Deep-Learning Architecture,” Applied Sciences (Switzerland), vol. 13, no. 2, 2023, doi: 10.3390/app13021116.
V. B. Sharma et al., Recent advancements in ai-enabled smart electronics packaging for structural health monitoring, vol. 11, no. 10. 2021. doi: 10.3390/met11101537.
S. H. M. Rizvi and M. Abbas, “From data to insight, enhancing structural health monitoring using physics-informed machine learning and advanced data collection methods,” Engineering Research Express, vol. 5, no. 3, 2023, doi: 10.1088/2631-8695/acefae.
M. A. Hossain, R. K. Chakrabortty, S. Elsawah, and M. J. Ryan, “Very short-term forecasting of wind power generation using hybrid deep learning model,” Journal of Cleaner Production, vol. 296, p. 126564, 2021, doi: 10.1016/j.jclepro.2021.126564.
S. Srivastava, B. Paul, and D. Gupta, “Study of Word Embeddings for Enhanced Cyber Security Named Entity Recognition,” Procedia Computer Science, vol. 218, pp. 449–460, 2022, doi: 10.1016/j.procs.2023.01.027.
G. Alkhayat and R. Mehmood, “A review and taxonomy of wind and solar energy forecasting methods based on deep learning,” Energy and AI, vol. 4, p. 100060, 2021, doi: 10.1016/j.egyai.2021.100060.
Y. Wang, H. Zhang, and G. Zhang, “cPSO-CNN: An efficient PSO-based algorithm for fine-tuning hyper-parameters of convolutional neural networks,” Swarm and Evolutionary Computation, vol. 49, pp. 114–123, 2019, doi: 10.1016/j.swevo.2019.06.002.
E. Ayrey and D. J. Hayes, “The use of three-dimensional convolutional neural networks to interpret LiDAR for forest inventory,” Remote Sensing, vol. 10, no. 4, pp. 1–16, 2018, doi: 10.3390/rs10040649.
DOI: https://doi.org/10.18196/jrc.v5i5.22558
Refbacks
- There are currently no refbacks.
Copyright (c) 2024 Mohamed S. Hofny, Nouby M. Ghazaly, Ahmed N. Shmroukh, Mostafa Abouelsoud
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Robotics and Control (JRC)
P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com