Optimizing Membership Function Tuning for Fuzzy Control of Robotic Manipulators Using PID-Driven Data Techniques

Phichitphon Chotikunnan, Rawiphon Chotikunnan, Anuchit Nirapai, Anantasak Wongkamhang, Pariwat Imura, Manas Sangworasil

Abstract


In this study, a method for optimizing membership function tuning for fuzzy control of robotic manipulators using PID-driven data techniques is presented. Traditional approaches for designing membership functions in fuzzy control systems often rely on the experience and knowledge of the system designer, which can lead to suboptimal performance. By utilizing data collected from a PID control system, the proposed method aims to enhance the precision and controllability of robotic manipulators through improved fuzzy logic control. A Mamdani-type fuzzy logic controller was developed and its performance was simulated in Simulink, demonstrating the effectiveness of the proposed optimization technique. The results indicate that the method can outperform conventional P control systems in terms of overshoot reduction while maintaining comparable transient response specifications. This research highlights the potential of the PID-driven data-based approach for optimizing membership function tuning in fuzzy control systems and offers valuable insights for the development and evaluation of fuzzy logic control in robotic manipulators. Future work may focus on further optimization of the tuning process, evaluation of system robustness under various operating conditions, and exploring the integration of other artificial intelligence techniques for improved control performance.

Keywords


Fuzzy logic control; PID control; Robotic; Simulation

Full Text:

PDF

References


J. An, F. You, M. Wu, and J. She, "Iterative learning control for nonlinear weighing and feeding process," Mathematical Problems in Engineering, vol. 2018, Article ID 9425902, 2018.

X. Li, J. Liu, L. Wang, K. Wang, and Y. Li, "Welding process tracking control based on multiple model iterative learning control," Mathematical Problems in Engineering, vol. 2019, Article ID 6137352, 2019.

M. Marsono, Y. Yoto, A. Suyetno, and R. Nurmalasari, "Design and Programming of 5 Axis Manipulator Robot with GrblGru Open Source Software on Preparing Vocational Students’ Robotic Skills," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 539-545, 2021.

A. R. Al Tahtawi, M. Agni, and T. D. Hendrawati, "Small-scale robot arm design with pick and place mission based on inverse kinematics," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 469-475, 2021.

C. Deniz and G. Gökmen, "A new robotic application for COVID-19 specimen collection process," Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 73-77, 2022.

J. Jung and K. Kong, "Mechanical parameter tuning based on iterative learning mechatronics approach," IEEE/ASME Transactions on Mechatronics, vol. 23, no. 2, pp. 906-915, 2018.

A. Dhyani, M. K. Panda, and B. Jha, "Moth-flame optimization-based fuzzy-PID controller for optimal control of active magnetic bearing system, " Iranian journal of science and technology, transactions of electrical engineering, vol. 42, no. 4, pp. 451-463, 2018.

A. Ma'arif and A. Çakan, "Simulation and arduino hardware implementation of dc motor control using sliding mode controller, " Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 582

A. Ma'arif and N. R. Setiawan, "Control of DC motor using integral state feedback and comparison with PID: simulation and Arduino implementation, " Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 456-461, 2021.

B. Hekimoğlu, "Optimal Tuning of Fractional Order PID Controller for DC Motor Speed Control via Chaotic Atom Search Optimization Algorithm, " IEEE Access, vol. 7, pp. 38100-38114, 2019.

A. Latif, A. Z. Arfianto, H. A. Widodo, R. Rahim, and E. T. Helmy, "Motor DC PID System Regulator for Mini Conveyor Drive Based on MATLAB, " Journal of Robotics and Control (JRC), vol. 1, no. 6, pp. 185-190, 2020.

H. Maghfiroh, A. Ramelan, and F. Adriyanto, "Fuzzy-PID in BLDC motor speed control using MATLAB/Simulink, " Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 8-13, 2022.

S. Gobinath and M. Madheswaran, "Deep Perceptron Neural Network with Fuzzy PID Controller for Speed Control and Stability Analysis of BLDC Motor, " Soft Computing, vol. 24, no. 13, pp. 10161-10180, 2020.

K. Vanchinathan and N. Selvaganesan, "Adaptive Fractional Order PID Controller Tuning for Brushless DC Motor Using Artificial Bee Colony Algorithm, " Results in Control and Optimization, vol. 4, 2021.

P. Dutta and S. K. Nayak, "Grey Wolf Optimizer Based PID Controller for Speed Control of BLDC Motor, " Journal of Electrical Engineering & Technology, vol. 16, no. 2, pp. 955-961, 2021

Y. Li, K. H. Ang, and G. C. Chong, "PID control system analysis and design, " IEEE Control Systems Magazine, vol. 26, no. 1, pp. 32-41, 2006. doi: 10. 1109/MCS. 2006. 1580152.

S.K. Mallempati, G. Satheesh, and S. Peddakotla, "Design of optimal PI controller for torque ripple minimization of SVPWM-DTC of BLDC motor," International Journal of Power Electronics and Drive Systems, vol. 14, no. 1, pp. 283, 2023.

R. P. Borase, D. K. Maghade, S. Y. Sondkar, and S. N. Pawar, “A review of PID control, tuning methods and applications, ” International Journal of Dynamics and Control, vol. 9, no. 2, pp. 818-827, 2021.

C. T. Chao, N. Sutarna, J. S. Chiou, and C. J. Wang, “An optimal fuzzy PID controller design based on conventional PID control and nonlinear factors, ” Applied Sciences, vol. 9, no. 6, pp. 1224, 2019.

D. Somwanshi, M. Bundele, G. Kumar, and G. Parashar, "Comparison of Fuzzy-PID and PID Controller for Speed Control of DC Motor Using LabVIEW, " in Procedia Computer Science, vol. 152, pp. 252-260, 2019.

S. J. Hammoodi, K. S. Flayyih, and A. R. Hamad, "Design and Implementation of Speed Control System for DC Motor Based on PID Control and Matlab Simulink, " International Journal of Power Electronics and Drive Systems, vol. 11, no. 1, pp. 127, 2020.

V. V. Patel, "Ziegler-Nichols Tuning Method, " Resonance, vol. 25, no. 10, pp. 1385-1397, 2020.

R. R. Alla, N. Lekyasri, and K. Rajani, "PID Control Design for Second Order Systems, " Int. J. Eng. Manuf, vol. 9, no. 4, pp. 45-56, 2019.

E. Bashier and O. Mohammed, "Optimally Tuned Proportional Integral Derivatives (PID) Controllers for Set-Point, " Journal of Engineering and Computer Science (JECS), vol. 13, no. 1, pp. 48-53, 2019.

T. Y. Wu, Y. Z. Jiang, Y. Z. Su, and W. C. Yeh, "Using Simplified Swarm Optimization on Multiloop Fuzzy PID Controller Tuning Design for Flow and Temperature Control System, " Applied Sciences, vol. 10, no. 23, pp. 8472, 2020.

V. Dubey, "Comparative Analysis of PID Tuning Techniques for Blood Glucose Level of Diabetic Patient, " Turkish Journal of Computer and Mathematics Education (TURCOMAT), vol. 12, no. 11, pp. 2948-2953, 2021.

A. O. Amole, O. E. Olabode, D. O. Akinyele, and S. G. Akinjobi, "Optimal Temperature Control Scheme for Milk Pasteurization Process Using Different Tuning Techniques for a Proportional Integral Derivative Controller, " Iranian Journal of Electrical and Electronic Engineering, vol. 2170, pp. 2170-2170, 2022.

D. Zhang, B. Du, P. Zhang, and S. Chen, "Constant force PID control for robotic manipulator based on fuzzy neural network algorithm," Complexity, vol. 2020, 2020, doi: 10.1155/2020/3491845.

B. Li, Y. Tan, J. Chen, X. Liu, and S. Yang, "Precise active seeding downforce control system based on fuzzy PID," Mathematical Problems in Engineering, vol. 2020, 2020, doi: 10.1155/2020/5123830.

R. Kristiyono and W. Wiyono, "Autotuning Fuzzy PID Controller for Speed Control of BLDC Motor," Journal of Robotics and Control, vol. 2, no. 5, pp. 400-407, 2021.

K. Lee, D. Y. Im, B. Kwak, and Y. J. Ryoo, "Design of fuzzy-PID controller for path tracking of mobile robot with differential drive," International Journal of Fuzzy Logic and Intelligent Systems, vol. 18, no. 3, pp. 220-228, 2018.

M. J. Mohamed and M. Y. Abbas, "Design of a Fuzzy PID Controller for Trajectory Tracking of a Mobile Robot," Engineering and Technology Journal, vol. 36, no. 1, pp. 100-110, 2018.

K. Eltag, M. S. Aslamx, and R. Ullah, "Dynamic Stability enhancement using fuzzy PID control technology for power system," International Journal of Control, Automation and Systems, vol. 17, pp. 234-242, 2019.

M. Rabah, A. Rohan, Y. J. Han, and S. H. Kim, "Design of fuzzy-PID controller for quadcopter trajectory-tracking," International Journal of Fuzzy Logic and Intelligent Systems, vol. 18, no. 3, pp. 204-213, 2018.

X. Long, Z. He, and Z. Wang, "Online optimal control of robotic systems with single critic NN-based reinforcement learning," Complexity, 2021, doi: 10.1155/2021/8839391.

N. Razmjooy and M. Ramezani, "Optimal control of two-wheeled self-balancing robot with interval uncertainties using Chebyshev inclusion method," Majlesi Journal of Electrical Engineering, vol. 12, no. 1, pp. 13-21, 2018.

C. L. Dembia, N. A. Bianco, A. Falisse, J. L. Hicks, and S. L. Delp, "Opensim moco: Musculoskeletal optimal control," PLOS Computational Biology, vol. 16, no. 12, p. e1008493, 2020.

C. Sánchez-Sánchez and D. Izzo, "Real-time optimal control via deep neural networks: study on landing problems," Journal of Guidance, Control, and Dynamics, vol. 41, no. 5, pp. 1122-1135, 2018.

B. Zhao, D. Liu, and C. Luo, "Reinforcement learning-based optimal stabilization for unknown nonlinear systems subject to inputs with uncertain constraints," IEEE Transactions on Neural Networks and Learning Systems, vol. 31, no. 10, pp. 4330-4340, 2019.

Y. Pan, C. A. Cheng, K. Saigol, K. Lee, X. Yan, E. A. Theodorou, and B. Boots, "Imitation learning for agile autonomous driving," The International Journal of Robotics Research, vol. 39, no. 2-3, pp. 286-302, 2020.

F. Ejaz, M.T. Hamayun, S. Hussain, S. Ijaz, S. Yang, N. Shehzad, and A. Rashid, "An adaptive sliding mode actuator fault tolerant control scheme for octorotor system," International Journal of Advanced Robotic Systems, vol. 16, no. 2, doi: 10.1177/1729881419832435, 2019.

J.Y. Zhai and Z.B. Song, "Adaptive sliding mode trajectory tracking control for wheeled mobile robots," International Journal of Control, vol. 92, no. 10, pp. 2255-2262, 2019.

B. Jiang, H.R. Karimi, S. Yang, C. Gao, and Y. Kao, "Observer-based adaptive sliding mode control for nonlinear stochastic Markov jump systems via T–S fuzzy modeling: Applications to robot arm model," IEEE Transactions on Industrial Electronics, vol. 68, no. 1, pp. 466-477, 2020.

L. Gracia, J.E. Solanes, P. Muñoz-Benavent, J.V. Miro, C. Perez-Vidal, and J. Tornero, "Adaptive sliding mode control for robotic surface treatment using force feedback," Mechatronics, vol. 52, pp. 102-118, 2018.

K. Liu, H. Gao, H. Ji, and Z. Hao, "Adaptive sliding mode based disturbance attenuation tracking control for wheeled mobile robots," International Journal of Control, Automation and Systems, vol. 18, no. 5, pp. 1288-1298, 2020.

T. Zhang, Y. Yu, and Y. Zou, "An adaptive sliding-mode iterative constant-force control method for robotic belt grinding based on a one-dimensional force sensor," Sensors, vol. 19, no. 7, p. 1635, 2019.

J. Yang, J. Na, G. Gao, and C. Zhang, "Adaptive neural tracking control of robotic manipulators with guaranteed nn weight convergence," Complexity, vol. 2018, article ID 7131562, 2018.

Q. Zhou, S. Zhao, H. Li, R. Lu, and C. Wu, "Adaptive neural network tracking control for robotic manipulators with dead zone," IEEE Transactions on Neural Networks and Learning Systems, vol. 30, no. 12, pp. 3611-3620, Dec. 2018.

Z. Chen, Y. Liu, W. He, H. Qiao, and H. Ji, "Adaptive-neural-network-based trajectory tracking control for a nonholonomic wheeled mobile robot with velocity constraints," IEEE Transactions on Industrial Electronics, vol. 68, no. 6, pp. 5057-5067, Jun. 2020.

M. Rahmani and M. H. Rahman, "Adaptive neural network fast fractional sliding mode control of a 7-DOF exoskeleton robot," International Journal of Control, Automation and Systems, vol. 18, no. 1, pp. 124-133, Jan. 2020.

B. Rahmani and M. Belkheiri, "Adaptive neural network output feedback control for flexible multi-link robotic manipulators," International Journal of Control, vol. 92, no. 10, pp. 2324-2338, 2019.

F. Luan, J. Na, Y. Huang, and G. Gao, "Adaptive neural network control for robotic manipulators with guaranteed finite-time convergence," Neurocomputing, vol. 337, pp. 153-164, 2019.

H. J. Yang and M. Tan, "Sliding mode control for flexible-link manipulators based on adaptive neural networks," International Journal of Automation and Computing, vol. 15, no. 2, pp. 239-248, Mar. 2018.

M. Rahmani, A. Ghanbari, and M. M. Ettefagh, "A novel adaptive neural network integral sliding-mode control of a biped robot using bat algorithm," Journal of Vibration and Control, vol. 24, no. 10, pp. 2045-2060, May 2018.

Z. Ma, J. Feng, and J. Yang, "Research on vertical air–water trans-media control of hybrid unmanned aerial underwater vehicles based on adaptive sliding mode dynamical surface control," International Journal of Advanced Robotic Systems, vol. 15, no. 2, article no. 1729881418770531, 2018.

W. He, Z. Yin and C. Sun, "Adaptive neural network control of a marine vessel with constraints using the asymmetric barrier Lyapunov function," in IEEE Transactions on Cybernetics, vol. 47, no. 7, pp. 1641-1651, July 2017.

J. Wang, P. Zhu, B. He, G. Deng, C. Zhang, and X. Huang, "An adaptive neural sliding mode control with ESO for uncertain nonlinear systems," Int. J. Control, Autom., and Syst., vol. 19, pp. 687-697, 2021.

X. Liu, C. Yang, Z. Chen, M. Wang, and C. Y. Su, "Neuro-adaptive observer based control of flexible joint robot," Neurocomputing, vol. 275, pp. 73-82, 2018.

J. A. Spanias, A. M. Simon, S. B. Finucane, E. J. Perreault, and L. J. Hargrove, "Online adaptive neural control of a robotic lower limb prosthesis," J. Neural Eng., vol. 15, no. 1, p. 016015, 2018.

C. Sun, G. Li, and J. Xu, "Adaptive neural network terminal sliding mode control for uncertain spatial robot," Int. J. Adv. Robotic Syst., vol. 16, no. 6, p. 1729881419894065, 2019.

J. Jiang, S. Guo, L. Zhang, and Q. Sun, "Motor Ability Evaluation of the Upper Extremity with Point-To-Point Training Movement Based on End-Effector Robot-Assisted Training System," J. Healthcare Eng., vol. 2022, article ID 1939844, 2022.

C. E. Luis and A. P. Schoellig, "Trajectory generation for multiagent point-to-point transitions via distributed model predictive control," IEEE Robotics and Automation Letters, vol. 4, no. 2, pp. 375-382, 2019.

M. M. G. Ardakani, B. Olofsson, A. Robertsson, and R. Johansson, "Model predictive control for real-time point-to-point trajectory generation," IEEE Trans. Autom. Sci. Eng., vol. 16, no. 2, pp. 972-983, 2018.

S. Xue, Z. Zhao, and F. Liu, "Latent variable point-to-point iterative learning model predictive control via reference trajectory updating," Eur. J. Control, vol. 65, article ID 100631, 2022.

A. Sarker, A. Sinha, and N. Chakraborty, "On screw linear interpolation for point-to-point path planning," in 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Oct. 2020, pp. 9480-9487.

Y. Wang, K. Zhu, B. Chen, and H. Wu, "A new model-free trajectory tracking control for robot manipulators," Mathematical Problems in Engineering, vol. 2018, pp. 1-13, 2018, doi: 10.1155/2018/1624520.

X. Ma, Y. Zhao, and Y. Di, "Trajectory tracking control of robot manipulators based on U-model," Mathematical Problems in Engineering, vol. 2020, pp. 1-10, 2020, doi: 10.1155/2020/8314202.

Y. Wang, F. Gao, and F. J. Doyle III, "Survey on iterative learning control, repetitive control, and run-to-run control," Journal of Process Control, vol. 19, no. 10, pp. 1589-1600, Dec. 2009, doi: 10.1016/j.jprocont.2009.09.006.

Q. Ai, D. Ke, J. Zuo, W. Meng, Q. Liu, Z. Zhang, and S. Q. Xie, "High-order model-free adaptive iterative learning control of pneumatic artificial muscle with enhanced convergence," IEEE Transactions on Industrial Electronics, vol. 67, no. 11, pp. 9548-9559, Nov. 2019.

B. P. Huynh, C. W. Wu, and Y. L. Kuo, "Force/position hybrid control for a hexa robot using gradient descent iterative learning control algorithm," IEEE Access, vol. 7, pp. 72329-72342, 2019.

X. Jin, "Iterative learning control for output‐constrained nonlinear systems with input quantization and actuator faults," International Journal of Robust and Nonlinear Control, vol. 28, no. 2, pp. 729-741, Jan. 2018.

X. Xing and J. Liu, "Modeling and robust adaptive iterative learning control of a vehicle‐based flexible manipulator with uncertainties," International Journal of Robust and Nonlinear Control, vol. 29, no. 8, pp. 2385-2405, Apr. 2019.

X. Jin, "Nonrepetitive leader–follower formation tracking for multiagent systems with LOS range and angle constraints using iterative learning control," IEEE Transactions on Cybernetics, vol. 49, no. 5, pp. 1748-1758, May 2018.

P. Chotikunnan and B. Panomruttanarug, "Practical design of a time-varying iterative learning control law using fuzzy logic," Journal of Intelligent & Fuzzy Systems, vol. Preprint, pp. 1-16, Feb. 2022.

P. Chotikunnan, B. Panomruttanarug, and P. Manoonpong, "Dual Design Iterative Learning Controller for Robotic Manipulator Application," Control Engineering and Applied Informatics, vol. 24, no. 3, pp. 76-85, Sep. 2022.

P. Chotikunnan, and B. Panomruttanarug, "The application of fuzzy logic control to balance a wheelchair," Journal of Control Engineering and Applied Informatics, vol. 18, no. 3, pp. 41-51, 2016.

H. Q. T. Ngo and M. H. Nguyen, "Enhancement of the Tracking Performance for Robot Manipulator by Using the Feed-forward Scheme and Reasonable Switching Mechanism," Journal of Robotics and Control (JRC), vol. 3, no. 3, pp. 328-337, 2022.

R. Kristiyono and W. Wiyono, "Autotuning fuzzy PID controller for speed control of BLDC motor," Journal of Robotics and Control (JRC), vol. 2, no. 5, pp. 400-407, 2021.

Z. Lin, C. Cui and G. Wu, "Dynamic modeling and torque feedforward based optimal fuzzy PD control of a high-speed parallel manipulator," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 527-538, 2021.

I. Suwarno, Y. Finayani, R. Rahim, J. Alhamid and A. R. Al-Obaidi, "Controllability and Observability Analysis of DC Motor System and a Design of FLC-Based Speed Control Algorithm," Journal of Robotics and Control (JRC), vol. 3, no. 2, pp. 227-235, 2022.

W. Robson, I. Ernawati and C. Nugrahaeni, "Design of multisensor automatic fan control system using Sugeno fuzzy method," Journal of Robotics and Control (JRC), vol. 2, no. 4, pp. 302-306, 2021.

A. H. Ginting, S. Y. Doo, D. E. Pollo, H. J. Djahi and E. R. Mauboy, "Attitude Control of a Quadrotor with Fuzzy Logic Controller on SO (3)," Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 101-106, 2022.

I. Iswanto and I. Ahmad, "Second Order Integral Fuzzy Logic Control Based Rocket Tracking Control," Journal of Robotics and Control (JRC), vol. 2, no. 6, pp. 594-604, 2021.

S. R. Utama, A. Firdausi and G. P. Hakim, "Control and Monitoring Automatic Floodgate based on NodeMCU and IOT with Fuzzy Logic Testing," Journal of Robotics and Control (JRC), vol. 3, no. 1, pp. 14-17, 2022.

I. R. F. Arif, A. Firdausi and G. P. Hakim, "Nebulizer operational time control based on drug volume and droplet size using fuzzy Sugeno method," Journal of Robotics and Control (JRC), vol. 2, no. 2, pp. 94-97, 2021.

H. Salem, M. Y. Shams, O. M. Elzeki, M. Abd Elfattah, J. F. Al-Amri, and S. Elnazer, "Fine-tuning fuzzy KNN classifier based on uncertainty membership for the medical diagnosis of diabetes," Applied Sciences, vol. 12, no. 3, p. 950, 2022.

M. Fayaz, I. Ullah, and D. Kim, "An optimized fuzzy logic control model based on a strategy for the learning of membership functions in an indoor environment," Electronics, vol. 8, no. 2, p. 132, 2019.

S. H. Khairuddin, M. H. Hasan, E. A. P. Akhir, and M. A. Hashmani, "Generating type 2 trapezoidal fuzzy membership function using genetic tuning," Computers, Materials and Continua, vol. 71, no. 1, pp. 717-734, 2022.

P. Chotikunnan and R. Chotikunnan, "Dual Design PID Controller for Robotic Manipulator Application," Journal of Robotics and Control (JRC), vol. 4, no. 1, pp. 23-34, 2023.

N. R. Setiawan, A. Ma'arif, and N. S. Widodo, "DC Motor Controller Using Full State Feedback," Control Systems and Optimization Letters, vol. 1, no. 1, pp. 7-11, 2023.

Y. Zahraoui, M. Akherraz, and A. Ma’arif, "A comparative study of nonlinear control schemes for induction motor operation improvement," International Journal of Robotics and Control Systems, vol. 2, no. 1, pp. 1-17, 2022.

D. S. Febriyan and R. D. Puriyanto, "Implementation of DC Motor PID Control On Conveyor for Separating Potato Seeds by Weight," International Journal of Robotics and Control Systems, vol. 1, no. 1, pp. 15-26, 2021.

H. Maghfiroh, A. J. Titus, A. Sujono, F. Adriyanto, and J. S. Saputro, "Induction Motor Torque Measurement using Prony Brake System and Close-loop Speed Control," International Journal of Robotics and Control Systems, vol. 2, no. 3, pp. 594-605, 2022.

Y. I. Nadjai, H. Ahmed, N. Takorabet, and P. Haghgooei, "Maximum Torque per Ampere Control of Permanent Magnet Assisted Synchronous Reluctance Motor: An Experimental Study," International Journal of Robotics and Control Systems, vol. 1, no. 4, pp. 416-427, 2021.

R. Rikwan and A. Ma'arif, "DC Motor Rotary Speed Control with Arduino UNO Based PID Control," Control Systems and Optimization Letters, vol. 1, no. 1, pp. 17-31, 2023.

D. Prastiyo and W. S. Aji, "Irrigation Sluice Control System Using Algorithm Based DC Motor PID And Omron PLC," Control Systems and Optimization Letters, vol. 1, no. 1, pp. 19-26, 2023.

A. A. Cahya and R. D. Puriyanto, "The Design of Rice Milling and Screening Systems Uses the DC Motor PID Method," Control Systems and Optimization Letters, vol. 1, no. 1, pp. 1-6, 2023.

E. S. Rahayu, A. Ma’arif, and A. Çakan, "Particle swarm optimization (PSO) tuning of PID control on DC motor," International Journal of Robotics and Control Systems, vol. 2, no. 2, pp. 435-447, 2022.

A. Bounemeur and M. Chemachema, "Adaptive fuzzy fault-tolerant control for a class of nonlinear systems under actuator faults: application to an inverted pendulum," International Journal of Robotics and Control Systems, vol. 1, no. 2, pp. 102-115, 2021.

H. Abdelfattah, S. A. Kotb, M. Esmail, and M. I. Mosaad, "Adaptive Neuro-Fuzzy Self Tuned-PID Controller for Stabilization of Core Power in a Pressurized Water Reactor," Int. J. Robotics and Control Systems, vol. 3, no. 1, pp. 1-18, 2023.

M. Elouni, H. Hamdi, B. Rabaoui, and N. B. Braiek, "Adaptive PID fault-tolerant tracking controller for Takagi-Sugeno fuzzy systems with actuator faults: application to single-link flexible joint robot," Int. J. Robotics and Control Systems, vol. 2, no. 3, pp. 523-546, 2022.




DOI: https://doi.org/10.18196/jrc.v4i2.18108

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Phichitphon Chotikunnan, Rawiphon Chotikunnan, Anuchit Nirapai, Anantasak Wongkamhang, Pariwat Imura, Manas Sangworasil

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik