The Design of Electro Cardiograph Signal Generator Using IC 14521 and IC 14017

Nur Hudha Wijaya, Wahidun Arif Rijali, Nishith Shahu, Irfan Ahmad, Rachmad Andri Atmoko

Abstract


ECG or Electrocardiograph is a tool to find out the electrical activity of the heart in patients. Electrocardiogram (ECG) is a graphic result records electrical potential resulting from by heartbeat, (Mervin J. Goldman, 1990). ECG recording very useful to know present certain hypertrophy, arrhythmia, pericarditis, for example potassium electrolyte disturbances. Tool this be named generator signal ECG. Tool the generator signal ECG functioning for produce the signal Electric heart in adult patient sand to check ECG error or no. So that it can ease technical electro medic in maintenance medical equipment periodically. The tool utilizes IC 14521 as oscillator or signal generator and using IC 14 017 as a shift register who has responsibility to remove from pin 1 to pin the other. The benefits of the ECG signal generating device so that technical electro medic easy and not difficult in check ECG without must using patients. So this tool as a form clone of the human heart. The tool such as a patient simulator. Based on the results of laboratory tests that have been done with the author concluded that, ECG signal generating device to function properly so that produce form of mock patient's heart signal that shown monitored oscilloscope in the waveform display P, Q, R, S, T.

Keywords


heart; Electro Cardiograph; shift register

Full Text:

PDF

References


C. Enokawa, Y. Yonezawa, H. Maki, and M. Aritomo, “A microcontroller-based implantable telemetry system for sympathetic nerve activity and ECG measurement,” in Proceedings of the 19th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. “Magnificent Milestones and Emerging Opportunities in Medical Engineering” (Cat. No.97CH36136), 1997, vol. 5, no. C, pp. 2232–2234.

H. H. So and K. L. Chan, “Development of Qrs Detection Method for Real-Time Ambulatory Cardiac Monitor,” in Proceedings of the 19th Annual International Conference of the IEEE Engineering in Medicine and Biology Society. “Magnificent Milestones and Emerging Opportunities in Medical Engineering” (Cat. No.97CH36136), 1997, vol. 1, no. C, pp. 289–292.

F. Ahmed, M. A. M. Ali, and E. Zahedi, “A real time algorithm for the portable recording of fetal and maternal heart rates,” in 2000 TENCON Proceedings. Intelligent Systems and Technologies for the New Millennium (Cat. No.00CH37119), 2000, vol. 1, pp. 246–251.

C. Wong and K. L. Chan, “Development of a portable multi-functional patient monitor,” in Proceedings of the 22nd Annual International Conference of the IEEE Engineering in Medicine and Biology Society (Cat. No.00CH37143), 2000, vol. 4, pp. 2611–2614.

Gero von Wagner, S. Schubert, L. F. Ngambia, C. Morgenstern, and A. Bolz, “Concept for an event-triggered electrocardiographic telemetry-system using GSM for supervision of cardiac patients,” in IEEE/AFCEA EUROCOMM 2000. Information Systems for Enhanced Public Safety and Security (Cat. No.00EX405), 2000, pp. 374–377.

L. Szilagyi, Z. Benyo, S. M. Szilagyi, A. Szlavecz, and L. Nagy, “On-line QRS complex detection using wavelet filtering,” in 2001 Conference Proceedings of the 23rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2001, vol. 2, pp. 1872–1874.

H. L. Chan, C. H. Lin, and Y. L. Ko, “Segmentation of heart rate variability in different physical activities,” in Computers in Cardiology, 2003, 2003, vol. 30, pp. 97–100.

J. Welch, F. Guilak, and S. D. Baker, “A Wireless ECG Smart Sensor for Broad Application in Life Threatening Event Detection,” in The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2004, vol. 4, pp. 3447–3449.

J. M. Bote, J. Recas, F. Rincon, D. Atienza, and R. Hermida, “A Modular Low-Complexity ECG Delineation Algorithm for Real-Time Embedded Systems,” IEEE J. Biomed. Heal. Informatics, vol. 22, no. 2, pp. 429–441, Mar. 2018.

V. H. Rodriguez, C. Medrano, and I. Plaza, “A Real-Time QRS Complex Detector Based on Discrete Wavelet Transform and Adaptive Threshold as Standalone Application on ARM Microcontrollers,” in 2018 International Conference on Biomedical Engineering and Applications (ICBEA), 2018, pp. 1–6.

R. Isais, K. Nguyen, G. Perez, R. Rubio, and H. Nazeran, “A low-cost microcontroller-based wireless ECG-blood pressure telemonitor for home care,” in Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439), 2003, vol. 4, pp. 3157–3160.

J. J. Segura-Juarez, D. Cuesta-Frau, and L. Samblas-Pena, “A microcontroller-based portable electrocardiograph system,” in 10th IEEE International Conference on Electronics, Circuits and Systems, 2003. ICECS 2003. Proceedings of the 2003, 2003, vol. 2, pp. 922–925.

M. Formica, C. Tabernig, and S. Escobar, “A multichannel telemetry system for monitoring physiological information from the human gait: preliminary results,” in Proceedings of the 25th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (IEEE Cat. No.03CH37439), 2003, vol. 2, pp. 1799–1802.

M. Bolanos, H. Nazeran, I. Gonzalez, R. Parra, and C. Martinez, “A PDA-based electrocardiogram/blood pressure telemonitor for telemedicine,” in The 26th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2004, vol. 3, pp. 2169–2172.

C.-N. Chien, H.-W. Hsu, J.-K. Jang, C.-L. Rau, and F.-S. Jaw, “Microcontroller-based wireless recorder for biomedical signals,” in 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference, 2005, vol. 7 VOLS, pp. 5179–5181.

S. C. Yener and R. Mutlu, “A microcontroller-based ECG signal generator design utilizing microcontroller PWM output and experimental ECG data,” in 2018 Electric Electronics, Computer Science, Biomedical Engineerings’ Meeting (EBBT), 2018, pp. 1–4.

T. Deniz and A. Yilmaz, “Design and implementation of a digital ambulatory ECG recorder based on flash multimediacard memory,” in 2003 46th Midwest Symposium on Circuits and Systems, 2006, vol. 1, pp. 368–371.

H. Fariborzi, M. Moghavvemi, and S. Mehrkanoon, “Design of a Low-power Microcontroller-based Wireless ECG Monitoring System,” in 2007 5th Student Conference on Research and Development, 2007, no. December, pp. 1–4.

Y. Li, S. Wu, J. Li, Y. Bai, and S. Zhang, “The Development of Embedded EGG Recorder Based on ARM9,” in 2007 IEEE/ICME International Conference on Complex Medical Engineering, 2007, pp. 230–233.

J. Lönnblad, J. G. Castaño, M. Ekström, M. Lindén, and Y. Bäcklund, “Optimization of wireless bluetoothTM sensor systems,” Annu. Int. Conf. IEEE Eng. Med. Biol. - Proc., vol. 26 III, pp. 2133–2136, 2004.

Y. Ren et al., “System of Multi-parameter for Anaesthesia depth monitor,” in International Symposium on Bioelectronics and Bioinformations 2011, 2011, pp. 45–48.

A. Sobrinho, P. Cunha, L. D. Da Silva, A. Perkusich, T. Cordeiro, and J. Rego, “A simulation approach to certify electrocardiography devices,” 2015 17th Int. Conf. E-Health Networking, Appl. Serv. Heal. 2015, pp. 86–90, 2015.

M. Sayahkarajy and E. Supriyanto, “Design of a temporay external artificial pacemaker simulator,” in 2017 International Conference on Robotics, Automation and Sciences (ICORAS), 2017, pp. 1–8.

L. Yang, “Development and application of ECG bedside monitor,” in 2009 9th International Conference on Electronic Measurement & Instruments, 2009, pp. 4-390-4–394.

J. E. Gaxiola-Sosa, N. Mohsin, A. J. Palliyali, R. Tafreshi, and K. Entesari, “A portable 12-lead ECG wireless medical system for continuous cardiac-activity monitoring,” in 2nd Middle East Conference on Biomedical Engineering, 2014, pp. 123–126.

H. Vashi, G. T. Haldankar, and Y. S. Rao, “Detection of Atrioventricular Node and Its Parameters Using ECG,” in 2012 Fourth International Conference on Computational Intelligence and Communication Networks, 2012, pp. 295–299.

K. K. M. Rahman, M. M. Subashini, M. Nasor, and A. Tawfik, “Development of bio-shields for Arduino Uno,” in 2018 Advances in Science and Engineering Technology International Conferences (ASET), 2018, pp. 1–5.

A. Vehkaoja, T. Salpavaara, J. Verho, and J. Lekkala, “EMFi material as wearable heart rate sensor for night time recordings,” in 2010 IEEE Sensors, 2010, pp. 145–149.

I. Orha and S. Oniga, “Automated system for evaluating health status,” in 2013 IEEE 19th International Symposium for Design and Technology in Electronic Packaging (SIITME), 2013, pp. 219–222.

Vidhya V and D. Unnikrishnan, “Synthetic ECG and PPG signal generation using pulse shaping technique,” in 2015 Annual IEEE India Conference (INDICON), 2015, pp. 1–6.




DOI: https://doi.org/10.18196/jrc.2490

Refbacks

  • There are currently no refbacks.


Copyright (c) 2020 Journal of Robotics and Control (JRC)

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Journal of Robotics and Control (JRC)

P-ISSN: 2715-5056 || E-ISSN: 2715-5072
Organized by Peneliti Teknologi Teknik Indonesia
Published by Universitas Muhammadiyah Yogyakarta in collaboration with Peneliti Teknologi Teknik Indonesia, Indonesia and the Department of Electrical Engineering
Website: http://journal.umy.ac.id/index.php/jrc
Email: jrcofumy@gmail.com

Kuliah Teknik Elektro Terbaik